EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Understanding the Chamber Wall-Deposited Thin Film of Plasma Deposition Equipment for the Efficiency of In Situ Dry-Cleaning

Jiseok Lee, Jiwon Jang, Sang Jeen Hong

Coatings · 08.05.2025 · 15 (5) · 563

DOI: 10.3390/coatings15050563 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 08.05.2025. Verfasst von Jiseok Lee und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Council of Science & Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In plasma-enhanced chemical vapor deposition (PECVD) processes, thin films can accumulate on the inner chamber walls, resulting in particle contamination and process drift. In this study, we investigate the physical and chemical properties of these wall-deposited films to understand their spatial variation and impact on chamber maintenance. A 6-inch capacitively coupled plasma (CCP)-type PECVD system was used to deposit SiO2 films, whilst long silicon coupons were attached vertically to the chamber side walls to collect contamination samples. The collected contamination samples were comparatively analyzed in terms of their chemical properties and surface morphology. The results reveal significant differences in hydrogen content and Si–O bonding configurations compared to reference films deposited on wafers. The top chamber wall, located near the plasma region, exhibited higher hydrogen incorporation and larger Si–O–Si bonding angles, while the bottom wall exhibited rougher surfaces with larger particulate agglomerates. These variations were closely linked to differences in gas flow dynamics, precursor distribution, and the energy state of the plasma species at different chamber heights. The findings indicate that top-wall contaminants are more readily cleaned due to their high hydrogen content, while bottom-wall residues may be more persistent and pose higher risks for particle generation. This study provides insights into wall contamination behavior in PECVD systems and suggests strategies for spatially optimized chamber cleaning and conditioning in high-throughput semiconductor processes.

Förderung

  • National Research Council of Science & Technology

Zitieren

APA

Lee, J., Jang, J., & Hong, S. J. (2025). Understanding the Chamber Wall-Deposited Thin Film of Plasma Deposition Equipment for the Efficiency of In Situ Dry-Cleaning. Coatings, 15(5), 563. https://doi.org/10.3390/coatings15050563

Vancouver

Lee J, Jang J, Hong SJ. Understanding the Chamber Wall-Deposited Thin Film of Plasma Deposition Equipment for the Efficiency of In Situ Dry-Cleaning. Coatings. 2025;15(5):563. doi:10.3390/coatings15050563

BibTeX
@article{Lee2025,
  author = {Lee, Jiseok and Jang, Jiwon and Hong, Sang Jeen},
  title = {Understanding the Chamber Wall-Deposited Thin Film of Plasma Deposition Equipment for the Efficiency of In Situ Dry-Cleaning},
  journal = {Coatings},
  year = {2025},
  volume = {15},
  number = {5},
  pages = {563},
  doi = {10.3390/coatings15050563}
}
Kostenlos starten →