Experimental Investigation and Optimization of the Electrodeposition Parameters of Ni-Al2O3 Composite Coating Using the Taguchi Method
Coatings · 18.04.2025 · 15 (4) · 482
DOI: 10.3390/coatings15040482 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 18.04.2025. Verfasst von Ilias Reddah und 6 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Algerian Ministry of Higher Education and Scientific Research (MESRS), FCT—Fundação para a Ciência e Tecnologia, Centre for Mechanical Engineering, Materials and Processes.
Abstract (Originalsprache)
In this work, an experimental investigation is conducted with the aim of optimizing the electrodeposition parameters for Ni-Al2O3 composite coatings using the Taguchi method. The presented research is structured into two complementary sections. The first segment investigates the characteristics of Ni and Ni-Al2O3 coatings, specifically Al2O3 particle incorporation and crystallinity variations, using X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and hardness evaluation through micro-indentation testing. The second section uses statistical techniques, specifically Analysis of Variance (ANOVA) and signal-to-noise (S/N) ratio analysis, to determine which parameters have the most impact on the experimental results. ANOVA and the Response Surface Methodology (RSM) were used in a modeling technique to forecast and optimize the technical responses. Based on an L16 orthogonal design, sixteen tests were carried out to investigate the effects of several important variables, including agitation rate (200–350 rpm), deposition period (15–60 min), alumina concentration (10–25 g.L−1), and current density (2–5 A.dm−2). The conditions for optimizing microhardness (HV) and Al2O3 integration while limiting average crystallite size (ACS) were identified using the most suitable function. The obtained results reveal significant improvements in the composite coating’s properties, including a 164% increase in microhardness, a 400% rise in alumina incorporation, and a notable reduction in crystallite size, demonstrating the efficacy of the electrodeposition process and optimization strategy adopted.
Förderung
- Algerian Ministry of Higher Education and Scientific Research (MESRS)
- FCT—Fundação para a Ciência e Tecnologia
- Centre for Mechanical Engineering, Materials and Processes
Zitieren
APA
Reddah, I., Ghelani, L., Touati, S., Lekmine, F., Hvizdoš, P., Devesa, S., & Boumediri, H. (2025). Experimental Investigation and Optimization of the Electrodeposition Parameters of Ni-Al2O3 Composite Coating Using the Taguchi Method. Coatings, 15(4), 482. https://doi.org/10.3390/coatings15040482
Vancouver
Reddah I, Ghelani L, Touati S, Lekmine F, Hvizdoš P, Devesa S, et al. Experimental Investigation and Optimization of the Electrodeposition Parameters of Ni-Al2O3 Composite Coating Using the Taguchi Method. Coatings. 2025;15(4):482. doi:10.3390/coatings15040482
BibTeX
@article{Reddah2025,
author = {Reddah, Ilias and Ghelani, Laala and Touati, Sofiane and Lekmine, Farid and Hvizdoš, Pavol and Devesa, Susana and Boumediri, Haithem},
title = {Experimental Investigation and Optimization of the Electrodeposition Parameters of Ni-Al2O3 Composite Coating Using the Taguchi Method},
journal = {Coatings},
year = {2025},
volume = {15},
number = {4},
pages = {482},
doi = {10.3390/coatings15040482}
}
EUVIMED