EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Feasibility of Polyphosphoric Acid in Emulsified Asphalt Modification: Emulsification Characteristics, Rheological Properties, and Modification Mechanism

Simiao Pan, Xiang Liu, Xiaolong Li, Jingpeng Jia, Jun Yang

Coatings · 16.04.2025 · 15 (4) · 471

DOI: 10.3390/coatings15040471 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 16.04.2025. Verfasst von Simiao Pan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yunnan Fundamental Research Projects, Scientific Research Foundation of Education Department of Yunnan Province, Yunnan Provincial Department of Transportation Technology Innovation and Demonstration Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyphosphoric acid (PPA), a chemical modifier widely used in petroleum asphalt, results in significant performance improvements. However, its effectiveness for modified emulsified asphalt has not yet been thoroughly verified. This study aims to investigate the emulsification properties, rheological characteristics, compatibility, and modification mechanisms of PPA-modified emulsified asphalt and validate the feasibility of applying PPA for modification. Initially, PPA-modified emulsified asphalt was prepared at different dosages (0%, 0.5%, 1.0%, 1.5%, and 2.0%), and its emulsification characteristics, including evaporation residue properties and storage stability, were evaluated. Subsequently, the rheological performance and compatibility of PPA-modified emulsified asphalt at various temperatures were evaluated using a dynamic shear rheometer. Finally, Fourier transform infrared spectroscopy (FTIR) and fluorescence microscopy (FM) were utilized to investigate the effects of PPA modification on the chemical composition and microscopic characteristics of emulsified asphalt. The results indicated that, with increasing PPA dosage, the softening point of modified emulsified asphalt initially decreased and then increased, while penetration and ductility first increased and then decreased, accompanied by reduced storage stability. Furthermore, PPA modification can enhance the high-temperature stability, fatigue properties, and low-temperature performance of emulsified asphalt, but the effectiveness depended on the dosage of PPA. Specifically, optimal compatibility of modified emulsified asphalt was achieved at a PPA dosage of 1.0%. Notably, PPA underwent hydrolysis within the emulsified asphalt system, leading to modification mechanisms distinct from those observed in base asphalt modification. At a PPA dosage of 1.0%, asphalt particles within the emulsified asphalt exhibited the most uniform distribution. Conversely, excessive PPA dosage (e.g., 2.0%) caused significant particle aggregation, consequently weakening the modification effect.

Förderung

  • Yunnan Fundamental Research Projects
  • Scientific Research Foundation of Education Department of Yunnan Province
  • Yunnan Provincial Department of Transportation Technology Innovation and Demonstration Project
  • Fundamental Research Funds for the Central Universities
  • Analysis and Measurement Fund of Kunming University of Science and Technology

Zitieren

APA

Pan, S., Liu, X., Li, X., Jia, J., & Yang, J. (2025). Feasibility of Polyphosphoric Acid in Emulsified Asphalt Modification: Emulsification Characteristics, Rheological Properties, and Modification Mechanism. Coatings, 15(4), 471. https://doi.org/10.3390/coatings15040471

Vancouver

Pan S, Liu X, Li X, Jia J, Yang J. Feasibility of Polyphosphoric Acid in Emulsified Asphalt Modification: Emulsification Characteristics, Rheological Properties, and Modification Mechanism. Coatings. 2025;15(4):471. doi:10.3390/coatings15040471

BibTeX
@article{Pan2025,
  author = {Pan, Simiao and Liu, Xiang and Li, Xiaolong and Jia, Jingpeng and Yang, Jun},
  title = {Feasibility of Polyphosphoric Acid in Emulsified Asphalt Modification: Emulsification Characteristics, Rheological Properties, and Modification Mechanism},
  journal = {Coatings},
  year = {2025},
  volume = {15},
  number = {4},
  pages = {471},
  doi = {10.3390/coatings15040471}
}
Kostenlos starten →