Study on Fatigue Characteristics of Cement-Emulsified Asphalt Mortar Under Coupled Effects of Humidity and Freeze–Thaw
Coatings · 21.03.2025 · 15 (4) · 369
DOI: 10.3390/coatings15040369 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 21.03.2025. Verfasst von Shanshan Jin und 8 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, China Railway Construction Co., Ltd. Science and Technology Major Project, BUCEA Post Graduate Innovation Project.
Abstract (Originalsprache)
Cement-emulsified asphalt mortar (CA mortar) is an organic–inorganic composite material composed of cement, emulsified asphalt, fine sand, water, and various admixtures. It is mainly used as the cushion layer for high-speed railway ballastless tracks. CA mortar cushion layers in North China often have to withstand the coupling effects of humidity and freeze–thaw, which has a very important impact on the fatigue performance of CA mortar. Based on the big data statistical results, the temperature conditions and cycle times of the CA mortar layer Freeze–Thaw cycle in North China were determined. Also, a fatigue performance test under humidity–freeze–thaw coupling conditions was designed and carried out. The fitting curve equations of fatigue stress and fatigue life under different humidity conditions and freeze–thaw coupling were established. The relationship between fatigue performance parameters K and n and humidity conditions was analyzed. This study shows that with the increase in humidity, the fatigue life of CA mortar under different humidity conditions shows an overall downward trend. The fatigue performance and fatigue life stress level sensitivity of CA mortar decrease with increasing humidity. The proportion of water damage and freeze–thaw damage to total damage increases with increasing humidity, which means that the humidity and freeze–thaw have a more significant impact on the fatigue properties of CA mortar. When the humidity is low, the fatigue cracks of CA mortar are mostly generated across the cement paste, and the macroscopic damage presents as longitudinal cracking. When the humidity is high, the fatigue cracks of CA mortar are mostly generated at the interface between aggregate and paste, and the macroscopic damage presents as oblique cracking. Based on the analysis of the damage mechanism, it is suggested that the humidity of CA mortar should be controlled below 25% in the actual project to ensure its durability.
Förderung
- National Key R&D Program of China
- China Railway Construction Co., Ltd. Science and Technology Major Project
- BUCEA Post Graduate Innovation Project
- Project of Construction and Support for high-level Innovative Teams of Beijing Municipal Institutions
Zitieren
APA
Jin, S., Liu, P., Wang, Z., Zhou, D., Li, X., Xu, Z., Zhang, Y., Yan, Y., & Zhao, Y. (2025). Study on Fatigue Characteristics of Cement-Emulsified Asphalt Mortar Under Coupled Effects of Humidity and Freeze–Thaw. Coatings, 15(4), 369. https://doi.org/10.3390/coatings15040369
Vancouver
Jin S, Liu P, Wang Z, Zhou D, Li X, Xu Z, et al. Study on Fatigue Characteristics of Cement-Emulsified Asphalt Mortar Under Coupled Effects of Humidity and Freeze–Thaw. Coatings. 2025;15(4):369. doi:10.3390/coatings15040369
BibTeX
@article{Jin2025,
author = {Jin, Shanshan and Liu, Pengfei and Wang, Zhen and Zhou, Daxing and Li, Xiang and Xu, Zengmiao and Zhang, Yang and Yan, Yuling and Zhao, Yaodong},
title = {Study on Fatigue Characteristics of Cement-Emulsified Asphalt Mortar Under Coupled Effects of Humidity and Freeze–Thaw},
journal = {Coatings},
year = {2025},
volume = {15},
number = {4},
pages = {369},
doi = {10.3390/coatings15040369}
}
EUVIMED