Thickness Prediction of Negative Electrodes for Lithium Batteries in the Slot-Die Coating Process
Coatings · 08.02.2025 · 15 (2) · 206
DOI: 10.3390/coatings15020206 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 08.02.2025. Verfasst von Yuan Li und 7 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Program of Shaanxi Province, Undergraduate Innovation Training Program of Shaanxi Province.
Abstract (Originalsprache)
Slot-die coating is widely used in the preparation of negative electrodes for lithium batteries. The thickness of the negative electrode has a significant influence on the battery performance and lifespan, and different manufacturers have different requirements for its thickness. In order to reduce the waste caused by trial and error in the electrode preparation process, a prediction model for the negative electrode thickness was established and verified through simulation and experiments. Based on the Landau–Levich film equation and the Ruschak model, a high-precision prediction model was constructed by taking into account the influence of factors’, such as temperature and slurry, spreading characteristics on the coating thickness. The minimum coating thickness and its influencing factors were explored. Meanwhile, the simulation analysis of the coating thickness was performed, and the theoretical values of three common process parameters were compared with the simulation results, showing a deviation of only 2.9%. An experiment on predicting the thickness of the negative electrode of lithium batteries was conducted. Thickness measurements were performed on the samples prepared through the experiment and compared with theoretical values. The accuracy rate of this thickness prediction model can reach 98.75%.
Förderung
- Key Research and Development Program of Shaanxi Province
- Undergraduate Innovation Training Program of Shaanxi Province
Zitieren
APA
Li, Y., Ma, L., Yan, Y., Wang, Q., Zhang, P., Liu, S., Zhang, Y., & Yang, S. (2025). Thickness Prediction of Negative Electrodes for Lithium Batteries in the Slot-Die Coating Process. Coatings, 15(2), 206. https://doi.org/10.3390/coatings15020206
Vancouver
Li Y, Ma L, Yan Y, Wang Q, Zhang P, Liu S, et al. Thickness Prediction of Negative Electrodes for Lithium Batteries in the Slot-Die Coating Process. Coatings. 2025;15(2):206. doi:10.3390/coatings15020206
BibTeX
@article{Li2025,
author = {Li, Yuan and Ma, Li’e and Yan, Yanpeng and Wang, Qiang and Zhang, Peng and Liu, Shanhui and Zhang, Yifan and Yang, Saiqiang},
title = {Thickness Prediction of Negative Electrodes for Lithium Batteries in the Slot-Die Coating Process},
journal = {Coatings},
year = {2025},
volume = {15},
number = {2},
pages = {206},
doi = {10.3390/coatings15020206}
}
EUVIMED