Assessment of the Wettability and Mechanical Properties of Stearic-Acid-Modified Hydrophobic Cementitious Materials
Coatings · 17.01.2025 · 15 (1) · 100
DOI: 10.3390/coatings15010100 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 17.01.2025. Verfasst von Xuhao Wang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation Project, Key Technology Projects in the Transportation Industry, Xizang Autonomous Region Science and Technology Department Base and Talent Plan Project.
Abstract (Originalsprache)
Moisture is a critical factor leading to the deterioration of concrete structures. Hydrophobic cement-based materials, with their excellent waterproof performance, hold significant application value in humid, coastal, and cold environments. This study employed stearic acid (STA, CH3(CH2)16COOH) as a hydrophobic agent dissolved in anhydrous ethanol using ultrasonication to create an STA–ethanol solution. In addition, the ball-milling method was used to mix STA with tuff powder (TP) to prepare hydrophobic modified tuff powder (MTP). This study investigated the effects of the STA content, water–cement (w/c) ratio, cement–sand (c/s) ratio, the replacement rate, and addition method of TP and MTP on the wettability (contact angle and sorptivity) and compressive strength of the mortar. The effects of the STA on the cement hydration were explored by microanalysis techniques, such as SEM, XRD, and FTIR, and the modification method with the best effect was recommended based on a gray correlation degree analysis. The results indicate that the STA could be successfully grafted into the mortar without affecting the types of cement hydration products. When using the STA–ethanol solution for hydrophobic modification, adding 0.9% STA by weight increased the mortar contact angle to 69.5° and reduced the sorptivity by 22%, while the 28-day compressive strength was decreased. When the w/c ratio was 0.5, the contact angle rose with the increase in the replacement rate of MTP, while the sorptivity and compressive strength decreased. The grey relational analysis showed that at a w/c ratio of 0.4, the STA–ethanol solution was a more effective modification method in terms of reducing the mortar sorptivity.
Förderung
- National Natural Science Foundation Project
- Key Technology Projects in the Transportation Industry
- Xizang Autonomous Region Science and Technology Department Base and Talent Plan Project
Zitieren
APA
Wang, X., Zhang, W., Wang, Y., Wu, H., Danzeng, D., & Meng, Y. (2025). Assessment of the Wettability and Mechanical Properties of Stearic-Acid-Modified Hydrophobic Cementitious Materials. Coatings, 15(1), 100. https://doi.org/10.3390/coatings15010100
Vancouver
Wang X, Zhang W, Wang Y, Wu H, Danzeng D, Meng Y. Assessment of the Wettability and Mechanical Properties of Stearic-Acid-Modified Hydrophobic Cementitious Materials. Coatings. 2025;15(1):100. doi:10.3390/coatings15010100
BibTeX
@article{Wang2025,
author = {Wang, Xuhao and Zhang, Wenxiao and Wang, Yuan and Wu, Hongke and Danzeng, Dunzhu and Meng, Yahong},
title = {Assessment of the Wettability and Mechanical Properties of Stearic-Acid-Modified Hydrophobic Cementitious Materials},
journal = {Coatings},
year = {2025},
volume = {15},
number = {1},
pages = {100},
doi = {10.3390/coatings15010100}
}
EUVIMED