Research on the Influence of Magnetic Field Assistance on the Quality of an Electro-Spark Deposition Layer
Coatings · 15.01.2025 · 15 (1) · 88
DOI: 10.3390/coatings15010088 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 15.01.2025. Verfasst von Yu Liu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: LiaoNing Revitalization Talents Program, Liaoning BaiQianWan Talents Program, National Natural Science Foundation of China.
Abstract (Originalsprache)
Aimed at solving the problems of single control measures in the electro-spark deposition (ESD) process, difficulty controlling the micro-process using heterogeneous materials (for the electrode and matrix), and the unstable quality and reliability of repairs to the deposition layer, a method of magnetic-field-assistance electro-spark deposition (MFESD) was proposed. An MFESD device was built, and a Ni electrode was used for deposition on the surface of 45 steel under the conditions of deposition voltages of 30 V, 60 V, and 90 V, respectively. This study examined the impact of the magnetic field’s intensity and frequency on the microstructure and mechanical properties of electro-spark deposition layers. The results show that the sputtering and protrusion of the electrode material on the surface of the deposition layer gradually decrease with an increase in the magnetic field’s intensity and frequency, defects such as pores and cracks are obviously improved, and the structure is uninterrupted and compact. The surface roughness of the deposited layer decreases with an increase in the magnetic field’s intensity and frequency, and its surface roughness decreases by 44.3%. The cross-section effect of the deposited layer is improved. The thickness of the deposited layer increases with an increase in the magnetic field’s intensity and frequency; the thickness of the deposited layer increases by 13.39%, and its maximum thickness can reach 54.396 μm. At the same time, the microhardness of the deposited layer increases with an increase in the two aforementioned properties of the magnetic field, and its hardness increases by 5.32%. Using a magnetic field to control ESD can effectively control the microscopic process of deposition and obtain high-quality deposition coatings, which have important significance in the surface remanufacturing of key components of high-end equipment.
Förderung
- LiaoNing Revitalization Talents Program
- Liaoning BaiQianWan Talents Program
- National Natural Science Foundation of China
Zitieren
APA
Liu, Y., Zhang, S., Shao, W., Wang, Z., Qu, J., Zhou, W., & Zhang, S. (2025). Research on the Influence of Magnetic Field Assistance on the Quality of an Electro-Spark Deposition Layer. Coatings, 15(1), 88. https://doi.org/10.3390/coatings15010088
Vancouver
Liu Y, Zhang S, Shao W, Wang Z, Qu J, Zhou W, et al. Research on the Influence of Magnetic Field Assistance on the Quality of an Electro-Spark Deposition Layer. Coatings. 2025;15(1):88. doi:10.3390/coatings15010088
BibTeX
@article{Liu2025,
author = {Liu, Yu and Zhang, Shiqi and Shao, Weiqiang and Wang, Ziguang and Qu, Jiawei and Zhou, Weiming and Zhang, Shengfang},
title = {Research on the Influence of Magnetic Field Assistance on the Quality of an Electro-Spark Deposition Layer},
journal = {Coatings},
year = {2025},
volume = {15},
number = {1},
pages = {88},
doi = {10.3390/coatings15010088}
}
EUVIMED