EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Ni-WC Coating and a Carbide Solidification Simulation Mechanism of PTAW on the Descaling Roll Surface

Chang Li, Fanhong Kong, Lei Feng, Han Sun, Xing Han, Fenghua Luo

Coatings · 27.11.2024 · 14 (12) · 1490

DOI: 10.3390/coatings14121490 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 27.11.2024. Verfasst von Chang Li und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Ministry of Science and Technology of the People’s Republic of China, Applied Basic Research Program of Liaoning Province, Liaoning Province Metallurgical equipment and process control significant laboratory open project fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The descaling roll is a critical component in a hot-rolling production line. The operating conditions are significantly impacted by water with high-pressure and dynamic shocks caused by high-temperature steel slab descaling. Roll surfaces often experience wear and corrosion failures. This is attributed to a combination of high temperatures, intense wear, and repeated thermal, mechanical, and fluid stresses. Production costs and efficiency are significantly affected by the replacement of descaling rolls. Practice shows that the use of plasma cladding technology forms high-performance coatings. Conventional metal surface properties can be significantly improved. In this study, a Ni-WC composite coating was prepared on the descaling roll surface by plasma-transferred arc welding (PTAW) technology. The microstructure and phase composition of the welding overlay were analyzed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Results show that the WC hard phase added to the molten pool dissolves, and subsequently M7C3 and W2C phases are formed. To further explore the morphological evolution mechanism of the hard phase, numerical simulations were performed using a phase-field method to model M7C3 phase precipitation. The evolution from nucleation, rod-like growth, to eutectic structure formation was revealed. Experimental and simulation results show high consistency, validating the established phase-field model. In this study, a theoretical foundation for designing and preparing high-performance coatings is provided.

Förderung

  • National Key Research and Development Program of China, Ministry of Science and Technology of the People’s Republic of China
  • Applied Basic Research Program of Liaoning Province
  • Liaoning Province Metallurgical equipment and process control significant laboratory open project fund
  • Supported by the Fundamental Research Funds for the Liaoning Universities
  • Project for Graduate Education Reform and Technological Innovation and Entrepreneurship of University of Science and Technology Liaoning

Zitieren

APA

Li, C., Kong, F., Feng, L., Sun, H., Han, X., & Luo, F. (2024). Research on Ni-WC Coating and a Carbide Solidification Simulation Mechanism of PTAW on the Descaling Roll Surface. Coatings, 14(12), 1490. https://doi.org/10.3390/coatings14121490

Vancouver

Li C, Kong F, Feng L, Sun H, Han X, Luo F. Research on Ni-WC Coating and a Carbide Solidification Simulation Mechanism of PTAW on the Descaling Roll Surface. Coatings. 2024;14(12):1490. doi:10.3390/coatings14121490

BibTeX
@article{Li2024,
  author = {Li, Chang and Kong, Fanhong and Feng, Lei and Sun, Han and Han, Xing and Luo, Fenghua},
  title = {Research on Ni-WC Coating and a Carbide Solidification Simulation Mechanism of PTAW on the Descaling Roll Surface},
  journal = {Coatings},
  year = {2024},
  volume = {14},
  number = {12},
  pages = {1490},
  doi = {10.3390/coatings14121490}
}
Kostenlos starten →