Simulation Analysis of the Influence of Operating Parameters on the Pressure Profile in the Coating Bead
Coatings · 07.11.2024 · 14 (11) · 1413
DOI: 10.3390/coatings14111413 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 07.11.2024. Verfasst von Shaofei Pan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
In-depth analysis of the pressure profile of coating beads of slot die coating is helpful to better understand the behavior of the flow field in a coating bead and to better obtain a stable coating bead. In this study, ANSYS Fluent 19.2 was used to simulate slot die coating. The simulation results clearly show the influence of various operating parameters on the state of the coating bead and the pressure profile in the coating bead. The results show that the pressure profile can be clearly changed by changing the flow rate, substrate speed, and downstream die lip length. Simultaneously increasing the substrate speed from 0.08 to 0.12 m/s and the average inlet velocity from 0.02672 to 0.04 m/s results in an increase in maximum pressure from 298 to 538 Pa. Increasing only the substrate speed, from 0.12 to 0.16 m/s, causes the maximum pressure to decrease from 538 to 195 Pa. Increasing only the average inlet flow velocity, from 0.027 to 0.04 m/s, leads to an increase in maximum pressure from 167 to 745 Pa. Extending the downstream die lip length from 0.4 mm to 1 mm results in an increase in maximum pressure from 189 to 471 Pa. Reducing the upstream coating gap from 0.3 to 0.1 mm results in significant changes in the pressure profile in the upstream direction. Changing the contact angle can affect the pressure profile in the coating bead, but this is not clear. Changing the coating liquid density at a Reynolds number less than 1.733 has less effect on the pressure profile.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Pan, S., Chen, J., Wei, Y., Wu, C., Jia, J., & Yao, K. (2024). Simulation Analysis of the Influence of Operating Parameters on the Pressure Profile in the Coating Bead. Coatings, 14(11), 1413. https://doi.org/10.3390/coatings14111413
Vancouver
Pan S, Chen J, Wei Y, Wu C, Jia J, Yao K. Simulation Analysis of the Influence of Operating Parameters on the Pressure Profile in the Coating Bead. Coatings. 2024;14(11):1413. doi:10.3390/coatings14111413
BibTeX
@article{Pan2024,
author = {Pan, Shaofei and Chen, Jianneng and Wei, Yikun and Wu, Chuanyu and Jia, Jiangming and Yao, Kun},
title = {Simulation Analysis of the Influence of Operating Parameters on the Pressure Profile in the Coating Bead},
journal = {Coatings},
year = {2024},
volume = {14},
number = {11},
pages = {1413},
doi = {10.3390/coatings14111413}
}
EUVIMED