EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation of CrCoFeNiMn High-Entropy Alloy Coatings Using Gas Atomization and Laser Cladding: An Investigation of Microstructure, Mechanical Properties, and Wear Resistance

Haodong Tian, Yuzhen Yu, Xi Wang, Fan Chen, He Liu

Coatings · 19.07.2024 · 14 (7) · 906

DOI: 10.3390/coatings14070906 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 19.07.2024. Verfasst von Haodong Tian und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The National Natural Science Foundation of China, Postgraduate Research & Practice Innovation Program of Jiangsu Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a spherical CrCoFeNiMn high-entropy alloy (HEA) powder with uniform size was prepared using gas atomization. High-quality CrCoFeNiMn HEA coatings were then applied to a 316L stainless steel substrate using prepowdered laser cladding. The main focus of the study is on the phase structure composition and stability, microstructure evolution mechanism, mechanical properties, and wear resistance of CrCoFeNiMn HEA coatings. The results show that the CrCoFeNiMn HEA coatings prepared using gas atomization and laser melting techniques have a single FCC phase structure with a stable phase composition. The coatings had significantly higher diffraction peak intensities than the prepared HEA powders. The coating showed an evolution of columnar and equiaxed crystals, as well as twinned dislocation structures. Simultaneously, the microstructure transitions from large-angle grain boundaries to small-angle grain boundaries, resulting in a significant refinement of the grain structure. The CrCoFeNiMn HEA coating exhibits excellent mechanical properties. The microhardness of the coating increased by 66.06% when compared to the substrate, the maximum wear depth was reduced by 65.59%, and the average coefficient of friction decreased by 9.71%. These improvements are mainly attributed to the synergistic effects of grain boundary strengthening, fine grain strengthening, and twinning and dislocation strengthening within the coating.

Förderung

  • The National Natural Science Foundation of China
  • Postgraduate Research & Practice Innovation Program of Jiangsu Province

Zitieren

APA

Tian, H., Yu, Y., Wang, X., Chen, F., & Liu, H. (2024). Preparation of CrCoFeNiMn High-Entropy Alloy Coatings Using Gas Atomization and Laser Cladding: An Investigation of Microstructure, Mechanical Properties, and Wear Resistance. Coatings, 14(7), 906. https://doi.org/10.3390/coatings14070906

Vancouver

Tian H, Yu Y, Wang X, Chen F, Liu H. Preparation of CrCoFeNiMn High-Entropy Alloy Coatings Using Gas Atomization and Laser Cladding: An Investigation of Microstructure, Mechanical Properties, and Wear Resistance. Coatings. 2024;14(7):906. doi:10.3390/coatings14070906

BibTeX
@article{Tian2024,
  author = {Tian, Haodong and Yu, Yuzhen and Wang, Xi and Chen, Fan and Liu, He},
  title = {Preparation of CrCoFeNiMn High-Entropy Alloy Coatings Using Gas Atomization and Laser Cladding: An Investigation of Microstructure, Mechanical Properties, and Wear Resistance},
  journal = {Coatings},
  year = {2024},
  volume = {14},
  number = {7},
  pages = {906},
  doi = {10.3390/coatings14070906}
}
Kostenlos starten →