The Influence of Bias Voltage on the Structure and Properties of TiZrNbMo Coating Deposited by Magnetron Sputtering
Coatings · 05.07.2024 · 14 (7) · 844
DOI: 10.3390/coatings14070844 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 05.07.2024. Verfasst von Svitlana Romaniuk und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
TiZrNbMo coatings have been deposited using the direct current pulsed magnetron sputtering method in an argon atmosphere. The synthesis processes have been conducted under various process parameters. The structure (chemical and phase composition) and mechanical properties of the obtained multicomponent coatings are investigated as a function of plasma modulation frequency (10 Hz and 1000 Hz) and substrate bias (0 to −150 V). It is the case that an increase in the substrate bias decreases the deposition rate and alters the coating’s chemical composition. The latter leads to a Ti concentration decrease and a simultaneous increase in Mo and Nb concentrations in the final coating material. X-ray diffraction measurements indicate a single-phase BCC structure, with grain size decreasing as substrate bias increases. This ultimately forms an amorphous–nanocrystalline structure at −150 V. The mechanical properties of the multicomponent TiZrNbMo coatings have been determined using the nanoindentation method. The maximum values of hardness (13.45 GPa) and elastic modulus (188.6 GPa) are achieved at a substrate bias of −150 V. We also show that the minimum elastic modulus (41.8 GPa) is achieved at an intermediate substrate bias of −100 V.
Zitieren
APA
Romaniuk, S., Nowakowska-Langier, K., Strzelecki, G. W., Mulewska, K., & Minikayev, R. (2024). The Influence of Bias Voltage on the Structure and Properties of TiZrNbMo Coating Deposited by Magnetron Sputtering. Coatings, 14(7), 844. https://doi.org/10.3390/coatings14070844
Vancouver
Romaniuk S, Nowakowska-Langier K, Strzelecki GW, Mulewska K, Minikayev R. The Influence of Bias Voltage on the Structure and Properties of TiZrNbMo Coating Deposited by Magnetron Sputtering. Coatings. 2024;14(7):844. doi:10.3390/coatings14070844
BibTeX
@article{Romaniuk2024,
author = {Romaniuk, Svitlana and Nowakowska-Langier, Katarzyna and Strzelecki, Grzegorz Witold and Mulewska, Katarzyna and Minikayev, Roman},
title = {The Influence of Bias Voltage on the Structure and Properties of TiZrNbMo Coating Deposited by Magnetron Sputtering},
journal = {Coatings},
year = {2024},
volume = {14},
number = {7},
pages = {844},
doi = {10.3390/coatings14070844}
}
EUVIMED