EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Study on Microwave Drying Aluminum Hydroxide

Xuemei Zheng, Fuqin Yuan, Aiyuan Ma, Shihong Tian

Coatings · 01.06.2024 · 14 (6) · 687

DOI: 10.3390/coatings14060687 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 01.06.2024. Verfasst von Xuemei Zheng und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Scientific Research and Cultivation Project of Liupanshui Normal University, the Science and technology development project of Liupanshui City, discipline team of Liupanshui Normal University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aluminum hydroxide produced by the Bayer process contains a large amount of water which leads to the consumption of a large amount of heat for moisture removal in the calcination process, resulting in an increased energy consumption. The effects of temperature and microwave power on the dehydration ratio and the dry matter ratio of aluminum hydroxide were investigated. The characteristics of temperature variation during drying were discussed. X-ray diffraction (XRD), scanning electron microscopy (SEM), laser particle size, Fourier transform infrared (FTIR) spectroscopy, and dielectric property analyses were made to characterize the dried materials. The analysis results showed that within the range of bench-scale experimental parameters, the dehydration ratio was higher and the proportion of dry matter was lower at a higher final temperature. Within the range of pilot-scale experimental parameters, the dehydration ratio increased with the increasing microwave power from 500 W to 1500 W. XRD spectra revealed that when the final temperature exceeded 220 °C, a part of the aluminum hydroxide underwent a low-temperature phase transition to boehmite. The SEM images and a particle size analysis showed that there was no significant difference between the morphologies of the powder obtained by microwave drying and conventional drying methods. The powder obtained by both processes had an average particle size of around 80 μm. The dielectric constant and the dielectric loss of the dried material decreased greatly.

Förderung

  • the Scientific Research and Cultivation Project of Liupanshui Normal University
  • the Science and technology development project of Liupanshui City
  • discipline team of Liupanshui Normal University
  • key cultivation disciplines of Liupanshui Normal University
  • Guizhou Provincial First-class Professional
  • Carbon Neutral Engineering Research Center of Guizhou colleges and universities in Coal Industry
  • College Students’ Innovation and Entrepreneurship training program of Guizhou Province

Zitieren

APA

Zheng, X., Yuan, F., Ma, A., & Tian, S. (2024). Experimental Study on Microwave Drying Aluminum Hydroxide. Coatings, 14(6), 687. https://doi.org/10.3390/coatings14060687

Vancouver

Zheng X, Yuan F, Ma A, Tian S. Experimental Study on Microwave Drying Aluminum Hydroxide. Coatings. 2024;14(6):687. doi:10.3390/coatings14060687

BibTeX
@article{Zheng2024,
  author = {Zheng, Xuemei and Yuan, Fuqin and Ma, Aiyuan and Tian, Shihong},
  title = {Experimental Study on Microwave Drying Aluminum Hydroxide},
  journal = {Coatings},
  year = {2024},
  volume = {14},
  number = {6},
  pages = {687},
  doi = {10.3390/coatings14060687}
}
Kostenlos starten →