Galvanic Corrosion Behavior of the X80 Steel Welded Joint
Coatings · 24.04.2024 · 14 (5) · 528
DOI: 10.3390/coatings14050528 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 24.04.2024. Verfasst von Yadong Li und 5 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhejiang Provincial Natural Science Foundation of China, College Student Innovation and Entrepreneurship Training Program.
Abstract (Originalsprache)
Wire beam electrode techniques and classical electrochemical techniques were used to investigate the effect of the area ratio of each part of the welded joint on the galvanic corrosion behavior. The results showed that the order of the corrosion current density of the different regions in the simulated X80 steel welded joint was as follows: coarse-grained heat-affected zone > fine-grained heat-affected zone > intercritical heat-affected zone > base metal > weld metal. As the area ratio of weld metal increased, the galvanic potential shifted positively, the maximum anode galvanic current density increased and the main anode galvanic effect increased. On the other hand, as the area ratio of the base metal and the heat-affected zone decreased, the coupled potential shifted negatively and the maximum anode galvanic current density decreased. The galvanic corrosion intensity of the simulated X80 steel welded joint increased as the area ratio of the weld metal decreased and increased as the area ratio of the heat-affected zone and base metal increased. To enhance corrosion resistance, it is advisable to choose a shape with a larger groove to increase the WM area in the welded joint. Additionally, selecting a welding method with lower heat input and a higher energy density can help reduce the HAZ area in the welded joint.
Förderung
- Zhejiang Provincial Natural Science Foundation of China
- College Student Innovation and Entrepreneurship Training Program
Zitieren
APA
Li, Y., Sang, J., Yang, Y., Fang, G., Pang, J., & Liu, F. (2024). Galvanic Corrosion Behavior of the X80 Steel Welded Joint. Coatings, 14(5), 528. https://doi.org/10.3390/coatings14050528
Vancouver
Li Y, Sang J, Yang Y, Fang G, Pang J, Liu F. Galvanic Corrosion Behavior of the X80 Steel Welded Joint. Coatings. 2024;14(5):528. doi:10.3390/coatings14050528
BibTeX
@article{Li2024,
author = {Li, Yadong and Sang, Jiaxu and Yang, Yunzhi and Fang, Guoxin and Pang, Jianjun and Liu, Feng},
title = {Galvanic Corrosion Behavior of the X80 Steel Welded Joint},
journal = {Coatings},
year = {2024},
volume = {14},
number = {5},
pages = {528},
doi = {10.3390/coatings14050528}
}
EUVIMED