EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Calculation and Experimental Verification of Zn–Al–Mg Phase Diagram

Zhao Li, Yuanpeng Li, Sheming Jiang, Jie Zhang, Xin Liu, Qifu Zhang, Qiuyuan Liu

Coatings · 12.04.2024 · 14 (4) · 468

DOI: 10.3390/coatings14040468 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 12.04.2024. Verfasst von Zhao Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The liquid phase projection diagram, three-dimensional phase diagram, and vertical section diagram of the Zn–x%Al–x%Mg alloy system was calculated using the phase diagram calculation software Pandat. Simultaneously making full use of the self-developed hot-dip galvanizing process simulation machine by China Steel Research produced a 75%Zn–19%Al–6%Mg coating. A method combining phase diagram calculations and experimental verification was used to investigate the equilibrium phases and solidification process of the alloy. The microstructure of the 75%Zn–19%Al–6%Mg coating was studied using scanning electron microscopy and energy dispersive spectrometry. The results indicate that the coating structure consists of primary Al dendrite phase, MgZn2 inter-metallic compound and Zn-rich phase. There is no ternary eutectic structure in the coating structure. Al dendrites grow on the surface of the coating, while there are no Al dendrites on the cross-section. The experimental results strongly concur with the calculated results from the Pandat phase diagram. The solidification sequence of the 75%Zn–19%Al–6%Mg coating is L→L + Al→L + Al + MgZn2→Al + MgZn2 + Zn. The phase diagram guides industrial production significantly, avoiding the waste of transitional materials and zinc caused by small scale trial and error experiments, thus reducing unnecessary production costs. The factory can select a reasonable coating composition designing scheme in the phase diagram, based on the performance requirements of customers for the coating.

Zitieren

APA

Li, Z., Li, Y., Jiang, S., Zhang, J., Liu, X., Zhang, Q., & Liu, Q. (2024). Calculation and Experimental Verification of Zn–Al–Mg Phase Diagram. Coatings, 14(4), 468. https://doi.org/10.3390/coatings14040468

Vancouver

Li Z, Li Y, Jiang S, Zhang J, Liu X, Zhang Q, et al. Calculation and Experimental Verification of Zn–Al–Mg Phase Diagram. Coatings. 2024;14(4):468. doi:10.3390/coatings14040468

BibTeX
@article{Li2024,
  author = {Li, Zhao and Li, Yuanpeng and Jiang, Sheming and Zhang, Jie and Liu, Xin and Zhang, Qifu and Liu, Qiuyuan},
  title = {Calculation and Experimental Verification of Zn–Al–Mg Phase Diagram},
  journal = {Coatings},
  year = {2024},
  volume = {14},
  number = {4},
  pages = {468},
  doi = {10.3390/coatings14040468}
}
Kostenlos starten →