EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structure Optimization and Failure Mechanism of Metal Nitride Coatings for Enhancing the Sand Erosion Resistance of Aluminum Alloys

Zhufang Yang, Yuxin Ren, Yanli Zhang, Zilei Zhang, Guangyu He, Zhaolu Zhang

Coatings · 12.12.2023 · 13 (12) · 2074

DOI: 10.3390/coatings13122074 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 12.12.2023. Verfasst von Zhufang Yang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shaanxi Province Postdoctoral Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, TiN/Ti coatings with various modulation ratios (TiN/Ti-4:1, TiN/Ti-1:1, and TiN/Ti-1:4) were deposited on 2A70 aluminum to improve its sand erosion performance. The structural design of ion implantation + high thickness Ti transition layer + TiN/Ti coatings was applied to alleviate the differences in physical properties between hard nitride coatings and 2A70 aluminum. Surface roughness, XRD, elastic modulus, hardness, and the sand erosion failure mechanism of each coating were evaluated. The hardness of TiN/Ti-4:1, TiN/Ti-1:1, and TiN/Ti-1:4 on aluminum was 26.99 GPa, 21.70 GPa, and 10.99 GPa. Sand erosion test results showed that TiN/Ti-1:1 had the highest erosion rates due to its rougher surface. Under a 90° incident angle, TiN/Ti-4:1 and TiN/Ti-1:4 both exhibited vertical cracks parallel to the coating growth direction in the bottom TiN layer at the initial erosion stage. Also, a lateral crack caused by TiN layer crack deflection emerged due to a higher crack resistance in the thicker Ti layer of TiN/Ti-1:4. Furthermore, in comparison with the layer-by-layer spalling failure behavior of TiN/Ti-1:4, overall spallation induced by the crack coalescence of the TiN layer was exhibited in TiN/Ti-4:1. In addition, cracks formed and intersected in the inner TiN layer in TiN/Ti-1:1 and TiN/Ti-4:1, resulting in layer-by-layer spallation under a 45° incident angle.

Förderung

  • Shaanxi Province Postdoctoral Science Foundation

Zitieren

APA

Yang, Z., Ren, Y., Zhang, Y., Zhang, Z., He, G., & Zhang, Z. (2023). Structure Optimization and Failure Mechanism of Metal Nitride Coatings for Enhancing the Sand Erosion Resistance of Aluminum Alloys. Coatings, 13(12), 2074. https://doi.org/10.3390/coatings13122074

Vancouver

Yang Z, Ren Y, Zhang Y, Zhang Z, He G, Zhang Z. Structure Optimization and Failure Mechanism of Metal Nitride Coatings for Enhancing the Sand Erosion Resistance of Aluminum Alloys. Coatings. 2023;13(12):2074. doi:10.3390/coatings13122074

BibTeX
@article{Yang2023,
  author = {Yang, Zhufang and Ren, Yuxin and Zhang, Yanli and Zhang, Zilei and He, Guangyu and Zhang, Zhaolu},
  title = {Structure Optimization and Failure Mechanism of Metal Nitride Coatings for Enhancing the Sand Erosion Resistance of Aluminum Alloys},
  journal = {Coatings},
  year = {2023},
  volume = {13},
  number = {12},
  pages = {2074},
  doi = {10.3390/coatings13122074}
}
Kostenlos starten →