EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Mechanical Properties of Magnetron Sputtering TiN-Ni Nanocrystalline Composite Films

Bingyang Ma, Haitian Yuan, Zongqian He, Hailong Shang, Yanjie Hou, Hongbo Ju, Filipe Fernandes

Coatings · 06.11.2023 · 13 (11) · 1902

DOI: 10.3390/coatings13111902 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 06.11.2023. Verfasst von Bingyang Ma und 6 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, FEDER funds, FCT Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, TiN-Ni nanostructured composite films with different Ni contents are prepared using the magnetron sputtering method. The composition, microstructure, and mechanical properties of composite films are analyzed using an X-ray energy spectrometer (EDS), a scanning electron microscope (SEM), X-ray diffraction technology (XRD), a transmission electron microscope (TEM), and nanoindentation. All the films grow in a columnar crystal structure. There are only TiN diffraction peaks in the XRD spectrum, and no diffraction peaks of Ni and its compounds are observed. The addition of the Ni element disrupts the integrity of TiN lattice growth, resulting in a decrease in the grain size from 60 nm in TiN to 25 nm at 20.6% Ni. The film with a Ni content of 12.4 at.% forms a nanocomposite structure in which the nanocrystalline TiN phase (nc-TiN) is surrounded by the amorphous Ni (a-Ni) phase. The formation of nc-TiN/a-Ni nanocomposite structures relies on the good wettability of Ni on TiN ceramics. The hardness and elastic modulus of the film gradually decrease with the increase in Ni content, but the toughness is improved. The hardness and elastic modulus decrease from 19.9 GPa and 239.5 GPa for TiN film to 15.4 GPa and 223 GPa at 20.6 at.% Ni film, respectively, while the fracture toughness increases from 1.5 MPa·m1/2 to 2.0 MPa·m1/2. The soft and ductile Ni phase enriched at the TiN grain boundaries hinders the propagation of cracks in the TiN phase, resulting in a significant increase in the film’s toughness. The research results of this paper provide support for the design of TiN-Ni films with high strength and toughness and the understanding of the formation mechanism of nanocomposite structures.

Förderung

  • National Natural Science Foundation of China
  • FEDER funds
  • FCT Foundation

Zitieren

APA

Ma, B., Yuan, H., He, Z., Shang, H., Hou, Y., Ju, H., & Fernandes, F. (2023). Microstructure and Mechanical Properties of Magnetron Sputtering TiN-Ni Nanocrystalline Composite Films. Coatings, 13(11), 1902. https://doi.org/10.3390/coatings13111902

Vancouver

Ma B, Yuan H, He Z, Shang H, Hou Y, Ju H, et al. Microstructure and Mechanical Properties of Magnetron Sputtering TiN-Ni Nanocrystalline Composite Films. Coatings. 2023;13(11):1902. doi:10.3390/coatings13111902

BibTeX
@article{Ma2023,
  author = {Ma, Bingyang and Yuan, Haitian and He, Zongqian and Shang, Hailong and Hou, Yanjie and Ju, Hongbo and Fernandes, Filipe},
  title = {Microstructure and Mechanical Properties of Magnetron Sputtering TiN-Ni Nanocrystalline Composite Films},
  journal = {Coatings},
  year = {2023},
  volume = {13},
  number = {11},
  pages = {1902},
  doi = {10.3390/coatings13111902}
}
Kostenlos starten →