EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Comparison of Cellulose Nanocrystals and Nanofibers as Reinforcements to Amylose-Based Composite Bioplastics

Marwa Faisal, Marija Žmirić, Ngoc Kim, Sander Bruun, Loredana Mariniello, Michela Famiglietti, Heloisa Bordallo, Jacob Kirkensgaard, Bodil Jørgensen, Peter Ulvskov, Kim Hebelstrup, Andreas Blennow

Coatings · 09.09.2023 · 13 (9) · 1573

DOI: 10.3390/coatings13091573 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 09.09.2023. Verfasst von Marwa Faisal und 11 weiteren Autor:innen. Die Arbeit wurde bisher 46-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Danish Council for Independent Research, Innomission 4 Program of Innovation Fund Denmark, Carlsberg Fondet.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Starch-based bioplastics offer a promising alternative to conventional plastics. However, they exhibit certain limitations, notably in terms of mechanical strength and barrier properties. These challenges could potentially be addressed through the incorporation of nanocellulose as a reinforcing agent. In this study, we fabricated bioplastic films using a casting and blending approach, employing highly linear pure amylose (AM) in combination with cellulose nanofibers (CNF) or cellulose nanocrystals (CNC) at various ratios. This allowed for a direct comparison of CNF and CNC functionality within the AM matrix. We systematically assessed mechanical properties and water barrier characteristics, encompassing parameters such as water permeability, moisture content, swelling, solubility, crystallinity, thermal stability, transmittance, and opacity. Additionally, we investigated water vapor and oxygen permeability. Furthermore, we delved into distinctions between CNC and CNF biocomposites. Incorporation of either type of nanocellulose yielded enhancements in film properties, with CNF exerting a more pronounced positive influence compared to CNC. Particularly noteworthy were the mechanical properties, wherein CNF composite films demonstrated markedly higher tensile strength and Young’s modulus compared to their CNC counterparts. For instance, the inclusion of 1% CNF led to a substantial increase in AM tensile strength from 66.1 MPa to 144.8 MPa. Conversely, water vapor permeability exhibited a converse behavior, as the addition of 1% CNF resulted in a significant reduction of water barrier properties from 8.7 to 1.32 g mm m−2 24 h−1kPa−1. Intriguingly, CNC films displayed greater elongation at the point of rupture in comparison to CNF films. This can be attributed to the larger surface area of the CNC and the favorable interfacial interaction between AM and CNC. Notably, the introduction of nanocellulose led to reduced film opacity and improved thermal stability. In summary, nanocellulose interacted synergistically with the AM matrix, establishing a robust hydrogen-bonded network that greatly enhanced the performance of the biocomposite films.

Förderung

  • Danish Council for Independent Research
  • Innomission 4 Program of Innovation Fund Denmark
  • Carlsberg Fondet
  • University of Copenhagen
  • Food and Health Open Innovation Laboratory, Danish Roadmap for Research Infrastructure
  • Plant Carb ApS

Zitieren

APA

Faisal, M., Žmirić, M., Kim, N., Bruun, S., Mariniello, L., Famiglietti, M., Bordallo, H., Kirkensgaard, J., Jørgensen, B., Ulvskov, P., Hebelstrup, K., & Blennow, A. (2023). A Comparison of Cellulose Nanocrystals and Nanofibers as Reinforcements to Amylose-Based Composite Bioplastics. Coatings, 13(9), 1573. https://doi.org/10.3390/coatings13091573

Vancouver

Faisal M, Žmirić M, Kim N, Bruun S, Mariniello L, Famiglietti M, et al. A Comparison of Cellulose Nanocrystals and Nanofibers as Reinforcements to Amylose-Based Composite Bioplastics. Coatings. 2023;13(9):1573. doi:10.3390/coatings13091573

BibTeX
@article{Faisal2023,
  author = {Faisal, Marwa and Žmirić, Marija and Kim, Ngoc and Bruun, Sander and Mariniello, Loredana and Famiglietti, Michela and Bordallo, Heloisa and Kirkensgaard, Jacob and Jørgensen, Bodil and Ulvskov, Peter and Hebelstrup, Kim and Blennow, Andreas},
  title = {A Comparison of Cellulose Nanocrystals and Nanofibers as Reinforcements to Amylose-Based Composite Bioplastics},
  journal = {Coatings},
  year = {2023},
  volume = {13},
  number = {9},
  pages = {1573},
  doi = {10.3390/coatings13091573}
}
Kostenlos starten →