EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structure and High-Temperature Oxidation Performance of Si-Co Diffusion Coatings Prepared on a TiAl-Nb Alloy

Jin Tian, Conghui Zhang, Wei Lv, Xuan Li, Wei Tian

Coatings · 14.08.2023 · 13 (8) · 1427

DOI: 10.3390/coatings13081427 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 14.08.2023. Verfasst von Jin Tian und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovation Capacity Support Plan Project of Shanxi Province, Young Science and Technology Rising Star Project of Shanxi Province, Science and Technology Plan Project of Sichuan Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Si-Co diffusion coatings were prepared on a Y-modified TiAl-Nb alloy using the pack cementation process. The structures of the coatings prepared at different temperatures (1050, 1080, and 1120 °C) and pack Co contents (5, 10, and 20 wt.%) were comparatively studied. The coatings possessed the typical structure of a (Ti,X)Si2+Ti5Si4 (X represents Nb and Al elements) outer layer with a Co-rich superficial zone, a Ti5Si4+Ti5Si3 middle layer, and a TiAl2 inner layer. Increasing the co-deposition temperature in the range of 1050–1120 °C led to a larger coating thickness but a more-porous coating structure, while increasing the pack Co contents in the range of 5–20 wt.% caused a lower coating growth rate. The formation of the Si-Co diffusion coating followed an orderly process of depositing Si first and then Co. The Si-Co diffusion coating had much better anti-oxidation performance than both the TiAl-Nb substrate and pure silicide coating. After undergoing oxidation at 1000 °C for 100 h, the oxidation parabolic rate of the Si-Co diffusion coating was approximately 6.16 × 10−3 mg2/cm4h1, which was lower than those of the TiAl-Nb substrate by about two orders of magnitude and pure silicide coating by about one order of magnitude.

Förderung

  • Innovation Capacity Support Plan Project of Shanxi Province
  • Young Science and Technology Rising Star Project of Shanxi Province
  • Science and Technology Plan Project of Sichuan Province

Zitieren

APA

Tian, J., Zhang, C., Lv, W., Li, X., & Tian, W. (2023). Structure and High-Temperature Oxidation Performance of Si-Co Diffusion Coatings Prepared on a TiAl-Nb Alloy. Coatings, 13(8), 1427. https://doi.org/10.3390/coatings13081427

Vancouver

Tian J, Zhang C, Lv W, Li X, Tian W. Structure and High-Temperature Oxidation Performance of Si-Co Diffusion Coatings Prepared on a TiAl-Nb Alloy. Coatings. 2023;13(8):1427. doi:10.3390/coatings13081427

BibTeX
@article{Tian2023,
  author = {Tian, Jin and Zhang, Conghui and Lv, Wei and Li, Xuan and Tian, Wei},
  title = {Structure and High-Temperature Oxidation Performance of Si-Co Diffusion Coatings Prepared on a TiAl-Nb Alloy},
  journal = {Coatings},
  year = {2023},
  volume = {13},
  number = {8},
  pages = {1427},
  doi = {10.3390/coatings13081427}
}
Kostenlos starten →