Preparation of SrAl2O4: Eu2+, Dy3+ Powder by Combustion Method and Application in Anticounterfeiting
Coatings · 21.04.2023 · 13 (4) · 808
DOI: 10.3390/coatings13040808 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 21.04.2023. Verfasst von Peng Gao und 7 weiteren Autor:innen. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: General Project of Beijing Municipal Education Commission Science and Technology Program, Beijing Natural Science Foundation, Research and development of intelligent packaging for cultural relics.
Abstract (Originalsprache)
Green emitting long afterglow phosphor SrAl2O4: Eu2+, Dy3+ was synthesized via the combustion method. The physical phase analysis was carried out by X-ray diffraction, the results show that the introduction of Eu2+ into the lattice of the matrix resulted in a broad green emission centered at 508 nm, which is ascribed to the characteristic 4f65d1 to 4f7 electronic dipole allowed transition of Eu2+ ions. The doping of Eu2+ and Dy3+ did not change the physical phase of the crystals. Dy3+, as a coactivator, does not emit light itself, but can generate holes to form a trap energy level, which acts as an electron trap center to capture some of the electrons generated by the excitation of Eu2+. After excitation has ceased, let them gradually to transfer to the ground state for long afterglow luminescence. Then, we investigate the optical characterizations of different samples excited by X-ray. We found that SrAl2O4: Eu2+, 0.5% Dy3+ has this higher luminous intensity and afterglow. Its fluorescence lifetime is about 720 ns, and its quantum yield can reach 15.18%. Through search engine marketing (SEM) and energy dispersive X-ray spectroscopy (EDX), it has been proved that the sample has been successfully synthesized and its component content has been confirmed. The Eg value calculated from the diffuse reflectance spectrum is 4.61eV. The prepared SrAl2O4: Eu2+, Dy3+ luminescent powder is combined with Polydimethylsiloxane substrate for anticounterfeiting application, which provides a novel idea and method for the development of the anticounterfeiting field.
Förderung
- General Project of Beijing Municipal Education Commission Science and Technology Program
- Beijing Natural Science Foundation
- Research and development of intelligent packaging for cultural relics
- Construction and application transformation of cross media cloud platform for printing and packaging anticounterfeiting and traceability
- National Natural Science Foundation of China
- general project of fundamental research of BIGC
- Initial funding for the Doctoral Program of BIGC
- general project of science and technology of Beijing Municipal Education Commission
Zitieren
APA
Gao, P., Wang, J., Wu, J., Xu, Q., Yang, L., Liu, Q., Qi, Y., & Li, Z. (2023). Preparation of SrAl2O4: Eu2+, Dy3+ Powder by Combustion Method and Application in Anticounterfeiting. Coatings, 13(4), 808. https://doi.org/10.3390/coatings13040808
Vancouver
Gao P, Wang J, Wu J, Xu Q, Yang L, Liu Q, et al. Preparation of SrAl2O4: Eu2+, Dy3+ Powder by Combustion Method and Application in Anticounterfeiting. Coatings. 2023;13(4):808. doi:10.3390/coatings13040808
BibTeX
@article{Gao2023,
author = {Gao, Peng and Wang, Jigang and Wu, Jiao and Xu, Qingqing and Yang, Lixue and Liu, Quanxiao and Qi, Yuansheng and Li, Zhenjun},
title = {Preparation of SrAl2O4: Eu2+, Dy3+ Powder by Combustion Method and Application in Anticounterfeiting},
journal = {Coatings},
year = {2023},
volume = {13},
number = {4},
pages = {808},
doi = {10.3390/coatings13040808}
}
EUVIMED