Prediction of Microstructure and Mechanical Properties of Atmospheric Plasma-Sprayed 8YSZ Thermal Barrier Coatings Using Hybrid Machine Learning Approaches
Coatings · 12.03.2023 · 13 (3) · 602
DOI: 10.3390/coatings13030602 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 12.03.2023. Verfasst von Han Zhu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Projects in Anhui Province, Anhui Key Laboratory of Mine Intelligent Equipment and Technology, AnHui Key Laboratory of Detection Technology and Energy Saving Devices.
Abstract (Originalsprache)
The preparation of thermal barrier coatings (TBCs) is a complex process involving the integration of physics and chemistry, mainly involving the flight behavior and deposition behavior of molten particles. The service life and performance of the TBCs were determined by various factors, especially the preparation process parameters. In this work, to set up the quantitative characterization model between the preparation process parameters and the performance characteristic parameters, the ceramic powder particle size, spraying power and spraying distance were treated as the model input parameters, the characteristic parameters of microstructure properties represented by the porosity, circularity and Feret’s diameter and the mechanical property represented by the interfacial binding strength and macrohardness were treated as the model output. The typical back propagation (BP) model and extreme learning machine (ELM) model combined with flower pollination algorithm (FPA) optimization algorithm were employed for modeling analysis. To ensure the robustness of the obtained regression prediction model, the k-fold cross-validation method was employed to evaluate and analyze the regression prediction models. The results showed that the regression coefficient R value of the proposed FPA-ELM hybrid machine learning model was more than 0.94, the root-mean-square error (RMSE) was lower than 2 and showed better prediction accuracy and robustness. Finally, this work provided a novel method to optimize the TBCs preparation process, and was expected to improve the efficiency of TBCs preparation and characterization in the future.
Förderung
- Key Research and Development Projects in Anhui Province
- Anhui Key Laboratory of Mine Intelligent Equipment and Technology
- AnHui Key Laboratory of Detection Technology and Energy Saving Devices
- Anhui Institute of Future Technology Enterprise Cooperation Project
- Science and Technology Plan Project of Wuhu City
- Automotive New Technique of Anhui Province Engineering Technology Research Center
- National College Student Innovation and Entrepreneurship Training Program Project
Zitieren
APA
Zhu, H., Li, D., Yang, M., & Ye, D. (2023). Prediction of Microstructure and Mechanical Properties of Atmospheric Plasma-Sprayed 8YSZ Thermal Barrier Coatings Using Hybrid Machine Learning Approaches. Coatings, 13(3), 602. https://doi.org/10.3390/coatings13030602
Vancouver
Zhu H, Li D, Yang M, Ye D. Prediction of Microstructure and Mechanical Properties of Atmospheric Plasma-Sprayed 8YSZ Thermal Barrier Coatings Using Hybrid Machine Learning Approaches. Coatings. 2023;13(3):602. doi:10.3390/coatings13030602
BibTeX
@article{Zhu2023,
author = {Zhu, Han and Li, Dongpeng and Yang, Min and Ye, Dongdong},
title = {Prediction of Microstructure and Mechanical Properties of Atmospheric Plasma-Sprayed 8YSZ Thermal Barrier Coatings Using Hybrid Machine Learning Approaches},
journal = {Coatings},
year = {2023},
volume = {13},
number = {3},
pages = {602},
doi = {10.3390/coatings13030602}
}
EUVIMED