Copper-Based Composite Coatings by Solid-State Cold Spray Deposition: A Review
Coatings · 21.02.2023 · 13 (3) · 479
DOI: 10.3390/coatings13030479 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 21.02.2023. Verfasst von Huipeng Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 160 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key Project, 14th Five-Year Plan Preliminary Research Project.
Abstract (Originalsprache)
Copper (Cu)-based composite coatings have been widely applied in all kinds of important industry fields due to their outstanding comprehensive properties. The preparation temperature of a composite coating is the key factor affecting the properties, so the cold spray (CS) technology is characterized by low-temperature solid-state deposition, which ensures its emergence as the most promising technology for preparing the Cu-based composite coatings. In this paper, first, the principle of CS technology and the deposition mechanism of the coatings are introduced. On this basis, the deposition mechanism of Cu-based metal/ceramic composite coatings is further explored. Secondly, the effects of key CS process parameters (particle velocity, particle morphology, and substrate state) on the quality of the Cu-based composite coatings are summarized, and the current research status of cold-sprayed Cu-based composite coatings in the fields of corrosion resistance, wear resistance, self-lubricating properties, and electrical conductivity is reviewed. Moreover, the improvement of the performance of Cu-based composite coatings by various post-process treatments of coatings, such as heat treatment (HT) and friction stir processing (FSP), is elaborated. Finally, the future development of Cu-based composite coatings and CS technology is prospected.
Förderung
- National Natural Science Foundation of China
- Key Project
- 14th Five-Year Plan Preliminary Research Project
- 2022 Jiangxi Postgraduate Innovation Special Fund Project
Zitieren
APA
Wang, H., Li, P., Guo, W., Ma, G., & Wang, H. (2023). Copper-Based Composite Coatings by Solid-State Cold Spray Deposition: A Review. Coatings, 13(3), 479. https://doi.org/10.3390/coatings13030479
Vancouver
Wang H, Li P, Guo W, Ma G, Wang H. Copper-Based Composite Coatings by Solid-State Cold Spray Deposition: A Review. Coatings. 2023;13(3):479. doi:10.3390/coatings13030479
BibTeX
@article{Wang2023,
author = {Wang, Huipeng and Li, Peng and Guo, Weiling and Ma, Guozheng and Wang, Haidou},
title = {Copper-Based Composite Coatings by Solid-State Cold Spray Deposition: A Review},
journal = {Coatings},
year = {2023},
volume = {13},
number = {3},
pages = {479},
doi = {10.3390/coatings13030479}
}
EUVIMED