EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Laser Pulse Width and Intensity Distribution on the Crystallographic Characteristics of GeSn Film

Xiaomeng Wang, Dongfeng Qi, Wenju Zhou, Haotian Deng, Yuhan Liu, Shiyong Shangguan, Jianguo Zhang, Hongyu Zheng, Xueyun Liu

Coatings · 16.02.2023 · 13 (2) · 453

DOI: 10.3390/coatings13020453 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 16.02.2023. Verfasst von Xiaomeng Wang und 8 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, Natural Science Foundation of Shandong, Natural Science Foundation of Zhejiang.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Germanium-tin (GeSn) alloy is considered a promising candidate for a Si-based short-wavelength infrared range (SWIR) detector and laser source due to its excellent carrier mobility and bandgap tunability. Pulsed laser annealing (PLA) is one of the preeminent methods for preparing GeSn crystal films with high Sn content. However, current reports have not systematically investigated the effect of different pulse-width lasers on the crystalline quality of GeSn films. In addition, the intensity of the spot follows the gaussian distribution. As a result, various regions would have different crystalline properties. Therefore, in this study, we first provide the Raman spectra of several feature regions in the ablation state for single spot processing with various pulse-width lasers (continuous-wave, nanosecond, femtosecond). Furthermore, the impact of laser pulse width on the crystallization characteristics of GeSn film is explored for different single-spot processing states, particularly the Sn content incorporated into GeSn crystals. The transient heating time of the film surface and the faster non-equilibrium transition of the surface temperature inhibit the segregation of the Sn component. By comparing the Raman spectra of the pulsed laser, the continuous-wave laser shows the most acute Sn segregation phenomenon, with the lowest Sn content of approximately 2%. However, the femtosecond laser both ensures crystallization of the film and effective suppression of Sn expulsion from the lattices, and the content of Sn is 8.07%, which is similar to the origin of GeSn film.

Förderung

  • National Key R&D Program of China
  • Natural Science Foundation of Shandong
  • Natural Science Foundation of Zhejiang

Zitieren

APA

Wang, X., Qi, D., Zhou, W., Deng, H., Liu, Y., Shangguan, S., Zhang, J., Zheng, H., & Liu, X. (2023). Effect of Laser Pulse Width and Intensity Distribution on the Crystallographic Characteristics of GeSn Film. Coatings, 13(2), 453. https://doi.org/10.3390/coatings13020453

Vancouver

Wang X, Qi D, Zhou W, Deng H, Liu Y, Shangguan S, et al. Effect of Laser Pulse Width and Intensity Distribution on the Crystallographic Characteristics of GeSn Film. Coatings. 2023;13(2):453. doi:10.3390/coatings13020453

BibTeX
@article{Wang2023,
  author = {Wang, Xiaomeng and Qi, Dongfeng and Zhou, Wenju and Deng, Haotian and Liu, Yuhan and Shangguan, Shiyong and Zhang, Jianguo and Zheng, Hongyu and Liu, Xueyun},
  title = {Effect of Laser Pulse Width and Intensity Distribution on the Crystallographic Characteristics of GeSn Film},
  journal = {Coatings},
  year = {2023},
  volume = {13},
  number = {2},
  pages = {453},
  doi = {10.3390/coatings13020453}
}
Kostenlos starten →