EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Production and Characterization of Photocatalytic PEO Coatings Containing TiO2 Powders Recovered from Wastes

Luca Pezzato, Elena Colusso, Pietrogiovanni Cerchier, Alessio Giorgio Settimi, Katya Brunelli

Coatings · 11.02.2023 · 13 (2) · 411

DOI: 10.3390/coatings13020411 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 11.02.2023. Verfasst von Luca Pezzato und 4 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: BIRD 2020 program of the University of Padova.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, the possibility of incorporating TiO2 titanium dioxide particles derived from the recycling process of photovoltaic panels into PEO coatings was investigated. These particles constitute the main filler of the polymer constituting the rear part of the panels, and are characterized by possessing photocatalytic properties. The particles were added in different quantities to the electrolyte (a basic solution containing sodium silicate). The incorporation into the PEO coating produced on an aluminum alloy 1050, and the possibility of conferring photocatalytic properties to the surface of the samples were studied. The different samples were first characterized by optical microscope analysis, SEM and XRD and from the point of view of corrosion resistance by means of potentiodynamic tests. The photocatalytic properties of the samples were evaluated by monitoring the degradation of aqueous solutions of methylene blue exposed to a UV lamp. The particles have been successfully incorporated into the coating, and their presence does not alter the corrosion properties, which are improved compared to the uncoated sample. The particles, initially composed of a mixture of rutile and anatase, are instead transformed into rutile after incorporation due to the locally very high temperatures that can occur during the PEO process. In the samples obtained with higher quantities of titanium dioxide particles (60 and 80 g/L), a significant photocatalytic effect is observed with a significant reduction of methylene blue.

Förderung

  • BIRD 2020 program of the University of Padova

Zitieren

APA

Pezzato, L., Colusso, E., Cerchier, P., Settimi, A. G., & Brunelli, K. (2023). Production and Characterization of Photocatalytic PEO Coatings Containing TiO2 Powders Recovered from Wastes. Coatings, 13(2), 411. https://doi.org/10.3390/coatings13020411

Vancouver

Pezzato L, Colusso E, Cerchier P, Settimi AG, Brunelli K. Production and Characterization of Photocatalytic PEO Coatings Containing TiO2 Powders Recovered from Wastes. Coatings. 2023;13(2):411. doi:10.3390/coatings13020411

BibTeX
@article{Pezzato2023,
  author = {Pezzato, Luca and Colusso, Elena and Cerchier, Pietrogiovanni and Settimi, Alessio Giorgio and Brunelli, Katya},
  title = {Production and Characterization of Photocatalytic PEO Coatings Containing TiO2 Powders Recovered from Wastes},
  journal = {Coatings},
  year = {2023},
  volume = {13},
  number = {2},
  pages = {411},
  doi = {10.3390/coatings13020411}
}
Kostenlos starten →