EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Glass-Ceramic Protective Coatings Based on Metallurgical Slag

Alexander V. Gorokhovsky, Gleb Yu. Yurkov, Igor N. Burmistrov, Angel F. Villalpando-Reyna, Denis V. Kuznetsov, Alexander A. Gusev, Bekzod B. Khaidarov, Yuri V. Konyukhov, Olga V. Zakharova, Nikolay V. Kiselev

Coatings · 24.01.2023 · 13 (2) · 269

DOI: 10.3390/coatings13020269 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 24.01.2023. Verfasst von Alexander V. Gorokhovsky und 9 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pyroxene glass-ceramic enamels based on combinations of blast furnace slag and some additives were produced and investigated. The batch compositions and technological regimes of enameling were developed to produce high temperature protective coatings for carbon steel (ASTM 1010/1008). The composition of raw materials was selected to match the values of the thermal expansion coefficients of the glass-ceramic coating (~11∙10−6 K−1) and metal substrate (~12∙10−6 K−1) taking into account the temperatures of fluidization (Tf ~ 800°) and crystallization (Tc = 850−1020 °C) of the corresponding glasses. The covered and thermally treated samples of carbon steel were produced using single-layer enameling technology and investigated to specify structure, phase composition and properties of the coating and coating-steel interface. The obtained coatings were characterized with excellent adhesion to the steel (impact energy ~3 J) and protective properties. The closed porous structure of the coatings promoted low thermal conductivity (~1 W/(m·K)) and high (up to 1000 °C) thermal resistance, whereas the pyroxene-like crystalline phases supported high wear and chemical resistance as well as micro-hardness (~480 MPa) and thermal shock resistance (>30 cycles of 23–700 °C). The obtained cheap coatings and effective protective coatings could be used at the temperatures up to 1100 °C in the corrosive atmosphere and under the action of abrasive particles.

Förderung

  • Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Gorokhovsky, A. V., Yurkov, G. Y., Burmistrov, I. N., Villalpando-Reyna, A. F., Kuznetsov, D. V., Gusev, A. A., Khaidarov, B. B., Konyukhov, Y. V., Zakharova, O. V., & Kiselev, N. V. (2023). Glass-Ceramic Protective Coatings Based on Metallurgical Slag. Coatings, 13(2), 269. https://doi.org/10.3390/coatings13020269

Vancouver

Gorokhovsky AV, Yurkov GY, Burmistrov IN, Villalpando-Reyna AF, Kuznetsov DV, Gusev AA, et al. Glass-Ceramic Protective Coatings Based on Metallurgical Slag. Coatings. 2023;13(2):269. doi:10.3390/coatings13020269

BibTeX
@article{Gorokhovsky2023,
  author = {Gorokhovsky, Alexander V. and Yurkov, Gleb Yu. and Burmistrov, Igor N. and Villalpando-Reyna, Angel F. and Kuznetsov, Denis V. and Gusev, Alexander A. and Khaidarov, Bekzod B. and Konyukhov, Yuri V. and Zakharova, Olga V. and Kiselev, Nikolay V.},
  title = {Glass-Ceramic Protective Coatings Based on Metallurgical Slag},
  journal = {Coatings},
  year = {2023},
  volume = {13},
  number = {2},
  pages = {269},
  doi = {10.3390/coatings13020269}
}
Kostenlos starten →