P-type (CuTi)Ox Thin Films Deposited by Magnetron Co-Sputtering and Their Electronic and Hydrogen Sensing Properties
Coatings · 17.01.2023 · 13 (2) · 220
DOI: 10.3390/coatings13020220 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 17.01.2023. Verfasst von Ewa Mańkowska und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Polish National Science Center (NCN).
Abstract (Originalsprache)
Thin films of copper oxide (CuxO), titanium oxide (TiOx), and several mixtures of copper and titanium oxides ((CuTi)Ox) were deposited using magnetron sputtering. X-ray diffraction analysis of the as-deposited TiOx thin film revealed the presence of TiO crystallites, while in the case of (CuTi)Ox with the lowest amount of copper, metallic Cu crystallites were found. In the case of (Cu0.77Ti0.23)Ox and CuxO thin films, characteristic peaks for metallic copper and copper oxides were observed in their diffractograms. It was found that post-process annealing at 473 K considerably affects the microstructure of (CuTi)Ox thin films. After annealing, anatase phase was observed in (Cu0.23Ti0.77)Ox and (Cu0.41Ti0.59)Ox thin films. In turn, the (Cu0.77Ti0.23)Ox and CuxO films were formed only in the copper oxide phase. The (Cu0.77Ti0.23)Ox film annealed at 473 K showed the best opto-electronic performance, as it had the highest transmission and the lowest resistivity. However, the greatest advantage of this thin film was the p-type semiconducting behavior, which was the strongest of all of the thin films in this work, as indicated by the measurement of the Seebeck coefficient. All deposited thin films were sensitive to hydrogen exposure, while the best sensor response of 10.9 was observed for the (Cu0.77Ti0.23) Ox thin film annealed at 473 K.
Förderung
- Polish National Science Center (NCN)
Zitieren
APA
Mańkowska, E., Mazur, M., Domaradzki, J., & Wojcieszak, D. (2023). P-type (CuTi)Ox Thin Films Deposited by Magnetron Co-Sputtering and Their Electronic and Hydrogen Sensing Properties. Coatings, 13(2), 220. https://doi.org/10.3390/coatings13020220
Vancouver
Mańkowska E, Mazur M, Domaradzki J, Wojcieszak D. P-type (CuTi)Ox Thin Films Deposited by Magnetron Co-Sputtering and Their Electronic and Hydrogen Sensing Properties. Coatings. 2023;13(2):220. doi:10.3390/coatings13020220
BibTeX
@article{Makowska2023,
author = {Mańkowska, Ewa and Mazur, Michał and Domaradzki, Jarosław and Wojcieszak, Damian},
title = {P-type (CuTi)Ox Thin Films Deposited by Magnetron Co-Sputtering and Their Electronic and Hydrogen Sensing Properties},
journal = {Coatings},
year = {2023},
volume = {13},
number = {2},
pages = {220},
doi = {10.3390/coatings13020220}
}
EUVIMED