EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of Optical and Electrical Properties of RF-Sputtered ZnSe/ZnTe Heterojunctions for Sensing Applications

Ana-Maria Panaitescu, Vlad-Andrei Antohe

Coatings · 16.01.2023 · 13 (1) · 208

DOI: 10.3390/coatings13010208 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 16.01.2023. Verfasst von Ana-Maria Panaitescu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Executive Unit for Financing Higher Education, Research, Development and Innovation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cadmium (Cd)-free photodiodes based on n-type Zinc Selenide/p-type Zinc Telluride (n-ZnSe/p-ZnTe) heterojunctions were prepared by Radio Frequency-Magnetron Sputtering (RF-MS) technique, and their detailed optical and electrical characterization was performed. Onto an optical glass substrate, 100 nm gold (Au) thin film was deposited by Thermal Vacuum Evaporation (TVE) representing the back-contact, followed by the successive RF-MS deposition of ZnTe, ZnSe, Zinc Oxide (ZnO) and Indium Tin Oxide (ITO) thin films, finally resulting in the Au/ZnTe/ZnSe/ZnO/ITO sub-micrometric “substrate”-type configuration. Next, the optical characterization by Ultraviolet-Visible (UV-VIS) spectroscopy was performed on the component thin films, and their optical band gap values were determined. The electrical measurements in the dark and under illumination at different light intensities were subsequently performed. The Current–Voltage (I–V) characteristics in the dark are nonlinear with a relatively high asymmetry, following the modified Shockley–Read equation. From their analysis, the series resistance, shunt resistance, the ideality factor and saturation current were determined with high accuracy. It is worth noting that the action spectrum of the structure is shifted to short wavelengths. A sensibility test for the 420–500 nm range was performed while changing the intensity of the incident light from 100 mW/cm2 down to 10 mW/cm2 and measuring the photocurrent. The obtained results provided sufficient information to consider the present sub-micrometric photodiodes based on n-ZnSe/p-ZnTe heterojunctions to be more suitable for the UV domain, demonstrating their potential for integration within UV photodetectors relying on environmentally-friendly materials.

Förderung

  • Executive Unit for Financing Higher Education, Research, Development and Innovation

Zitieren

APA

Panaitescu, A., & Antohe, V. (2023). Study of Optical and Electrical Properties of RF-Sputtered ZnSe/ZnTe Heterojunctions for Sensing Applications. Coatings, 13(1), 208. https://doi.org/10.3390/coatings13010208

Vancouver

Panaitescu A, Antohe V. Study of Optical and Electrical Properties of RF-Sputtered ZnSe/ZnTe Heterojunctions for Sensing Applications. Coatings. 2023;13(1):208. doi:10.3390/coatings13010208

BibTeX
@article{Panaitescu2023,
  author = {Panaitescu, Ana-Maria and Antohe, Vlad-Andrei},
  title = {Study of Optical and Electrical Properties of RF-Sputtered ZnSe/ZnTe Heterojunctions for Sensing Applications},
  journal = {Coatings},
  year = {2023},
  volume = {13},
  number = {1},
  pages = {208},
  doi = {10.3390/coatings13010208}
}
Kostenlos starten →