Review of Research Progress in Nontraditional Machining of Ultrahigh-Temperature Ceramic Matrix Composites
Coatings · 14.01.2023 · 13 (1) · 187
DOI: 10.3390/coatings13010187 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 14.01.2023. Verfasst von Ya Lu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 156 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Local Innovative and Research Teams Project of Guangdong Pearl River Talents Program, Henan Provincial key scientific and technological project, Guangdong Provincial Key Laboratory of Manufacturing Equipment Digitization.
Abstract (Originalsprache)
Ultrahigh-temperature ceramic matrix composites are currently among the most promising high-temperature-resistant materials, owing to their high-temperature strength, high-toughness and excellent corrosion resistance; they are widely used in national defense and aerospace fields. However, it is a difficult material to machine, and high precision is difficult to achieve using traditional machining methods. Nontraditional machining methods are not constrained by material physical and mechanical properties, and good surface quality is easily obtained, which is an important direction in the field of ultrahigh-temperature ceramic matrix composites. This paper summarizes the recent nontraditional machining methods utilized in the fabrication of ultrahigh-temperature ceramic matrix composites. Firstly, various nontraditional machining methods for ultrahigh-temperature ceramic matrix composites based on borides, carbides and nitrides are reviewed, and the machining performances under different machining conditions are compared. Subsequently, the problems and challenges of ultrahigh-temperature ceramic matrix composite nontraditional machining are summarized and discussed. Lastly, the future development path of nontraditional machining methods for ultrahigh-temperature ceramic matrix composites is summarized and predicted.
Förderung
- Local Innovative and Research Teams Project of Guangdong Pearl River Talents Program
- Henan Provincial key scientific and technological project
- Guangdong Provincial Key Laboratory of Manufacturing Equipment Digitization
Zitieren
APA
Lu, Y., Sun, P., Yang, X., Guo, X., Li, X., & Ming, W. (2023). Review of Research Progress in Nontraditional Machining of Ultrahigh-Temperature Ceramic Matrix Composites. Coatings, 13(1), 187. https://doi.org/10.3390/coatings13010187
Vancouver
Lu Y, Sun P, Yang X, Guo X, Li X, Ming W. Review of Research Progress in Nontraditional Machining of Ultrahigh-Temperature Ceramic Matrix Composites. Coatings. 2023;13(1):187. doi:10.3390/coatings13010187
BibTeX
@article{Lu2023,
author = {Lu, Ya and Sun, Peiyan and Yang, Xiaohong and Guo, Xudong and Li, Xiaoke and Ming, Wuyi},
title = {Review of Research Progress in Nontraditional Machining of Ultrahigh-Temperature Ceramic Matrix Composites},
journal = {Coatings},
year = {2023},
volume = {13},
number = {1},
pages = {187},
doi = {10.3390/coatings13010187}
}
EUVIMED