EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface and Tribological Properties of Powder Metallurgical Cp-Ti Titanium Alloy Modified by Shot Peening

Yasemin Yıldıran Avcu, Eleftherios Iakovakis, Mert Guney, Emirhan Çalım, Ayşe Özkılınç, Eray Abakay, Fikret Sönmez, Funda Gül Koç, Rıdvan Yamanoğlu, Abdulkadir Cengiz, Egemen Avcu

Coatings · 03.01.2023 · 13 (1) · 89

DOI: 10.3390/coatings13010089 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 03.01.2023. Verfasst von Yasemin Yıldıran Avcu und 10 weiteren Autor:innen. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kocaeli University Scientific Research Projects Coordination Unit.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present study reveals for the first time the dry sliding wear behavior of a powder metallurgical pure titanium alloy (Cp-Ti) modified by shot peening. Cp-Ti samples were manufactured via powder metallurgy, and then their surface and subsurface features were modified using a custom-made, fully automated shot-peening system. The texture isotropy rate and the highest orientation angle of the shot-peened samples were 71.5% and 36°, respectively. The Abbott curves of the shot-peened surfaces revealed that the most common areal roughness value was 5.177 μm, with a frequency of 8.1%. Shot-peened surfaces exhibited an ~20% lower wear rate than unpeened surfaces under dry sliding wear, whereas the coefficient of friction was the same for both surfaces. Micro-ploughing, micro-cutting, oxidation, and three-body abrasion wear mechanisms were observed on the shot-peened and unpeened surfaces. High resolution 3D surface topographies of worn unpeened and shot-peened surfaces revealed micro-scratches and inhomogeneities along wear tracks, which are indicative of three-body abrasion mechanisms during contact. In addition, vertical and horizontal microcracks were visible just beneath the wear track, suggesting a clear indication of plastic deformation during contact. The cross-sectional hardness maps of shot-peened samples revealed the formation of a work-hardened surface layer with shot peening, which improved the wear resistance. These findings support that shot peening can be a useful tool to modify the surface and tribological properties of powder metallurgical Cp-Ti alloys.

Förderung

  • Kocaeli University Scientific Research Projects Coordination Unit

Zitieren

APA

Avcu, Y. Y., Iakovakis, E., Guney, M., Çalım, E., Özkılınç, A., Abakay, E., Sönmez, F., Koç, F. G., Yamanoğlu, R., Cengiz, A., & Avcu, E. (2023). Surface and Tribological Properties of Powder Metallurgical Cp-Ti Titanium Alloy Modified by Shot Peening. Coatings, 13(1), 89. https://doi.org/10.3390/coatings13010089

Vancouver

Avcu YY, Iakovakis E, Guney M, Çalım E, Özkılınç A, Abakay E, et al. Surface and Tribological Properties of Powder Metallurgical Cp-Ti Titanium Alloy Modified by Shot Peening. Coatings. 2023;13(1):89. doi:10.3390/coatings13010089

BibTeX
@article{Avcu2023,
  author = {Avcu, Yasemin Yıldıran and Iakovakis, Eleftherios and Guney, Mert and Çalım, Emirhan and Özkılınç, Ayşe and Abakay, Eray and Sönmez, Fikret and Koç, Funda Gül and Yamanoğlu, Rıdvan and Cengiz, Abdulkadir and Avcu, Egemen},
  title = {Surface and Tribological Properties of Powder Metallurgical Cp-Ti Titanium Alloy Modified by Shot Peening},
  journal = {Coatings},
  year = {2023},
  volume = {13},
  number = {1},
  pages = {89},
  doi = {10.3390/coatings13010089}
}
Kostenlos starten →