From Resection to Rehabilitation in One Day: Digital Workflow for Mandibular Reconstruction with Fibular Free Flap and Immediate Dental Rehabilitation Using CAD/CAM Guides at the Point of Care
Craniomaxillofacial Trauma & Reconstruction · 12.03.2026 · 19 (1) · 15
DOI: 10.3390/cmtr19010015 ↗Kurz gefasst
Fachartikel in der Zeitschrift Craniomaxillofacial Trauma & Reconstruction, online erschienen am 12.03.2026. Verfasst von Matthias Ureel und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Oral & Craniomaxillofacial Surgery, Ghent University Hospital, C. Heymanslaan 10, 9000 Ghent, Belgium. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
By using virtual surgical planning (VSP) and 3D printed guides, complex maxillofacial defects can be reconstructed with high accuracy and predictability. A fully digital workflow resulting in a modular all-in-one 3D printed guide system for fibula osteotomies, bone segment positioning, fully guided dental implant placement and dental prosthesis fixation for mandibular reconstruction was developed at Ghent University Hospital. A follicular ameloblastoma of the left mandible was resected in a 28-year-old male. The defect was reconstructed with a two-segment fibular free flap with immediate placement of three dental implants and immediate implant loading with a screw-retained bridge. A split thickness skin graft and Elemental PerioPlast were used as wound dressing. Comparison of the preoperative planning with the postoperative CT-scan showed a deviation immediately after surgery, which was no longer present at the 6-month follow-up. The patient achieved a stable occlusion and 44 mm mouth opening and reported high satisfaction. This case illustrates that fully digital, immediate mandibular reconstruction with simultaneous implant placement and prosthetic rehabilitation is feasible and accurate and enhances early functional recovery. Future improvements in intraoperative validation may further refine accuracy and reproducibility in complex oncologic reconstructions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Oral & Craniomaxillofacial Surgery, Ghent University Hospital, C. Heymanslaan 10, 9000 Ghent, Belgium.
- Department of Dentistry, Ghent University Hospital, C. Heymanslaan 10, 9000 Ghent, Belgium.
- Department of Plastic and Reconstructive Surgery, Ghent University Hospital, C. Heymanslaan 10, 9000 Ghent, Belgium.
ORCID-Profile: Matthias Ureel, Benjamin Denoiseux, Pieter-Jan Boderé, Renaat Coopman
Zitieren
APA
Ureel, M., Denoiseux, B., Brijs, K., Boderé, P. J., Dhooghe, N., & Coopman, R. (2026). From Resection to Rehabilitation in One Day: Digital Workflow for Mandibular Reconstruction with Fibular Free Flap and Immediate Dental Rehabilitation Using CAD/CAM Guides at the Point of Care. Craniomaxillofacial Trauma & Reconstruction, 19(1), 15. https://doi.org/10.3390/cmtr19010015
Vancouver
Ureel M, Denoiseux B, Brijs K, Boderé PJ, Dhooghe N, Coopman R. From Resection to Rehabilitation in One Day: Digital Workflow for Mandibular Reconstruction with Fibular Free Flap and Immediate Dental Rehabilitation Using CAD/CAM Guides at the Point of Care. Craniomaxillofacial Trauma & Reconstruction. 2026;19(1):15. doi:10.3390/cmtr19010015
BibTeX
@article{Ureel2026,
author = {Ureel, Matthias and Denoiseux, Benjamin and Brijs, Katrien and Boderé, Pieter-Jan and Dhooghe, Nicolas and Coopman, Renaat},
title = {From Resection to Rehabilitation in One Day: Digital Workflow for Mandibular Reconstruction with Fibular Free Flap and Immediate Dental Rehabilitation Using CAD/CAM Guides at the Point of Care},
journal = {Craniomaxillofacial Trauma & Reconstruction},
year = {2026},
volume = {19},
number = {1},
pages = {15},
doi = {10.3390/cmtr19010015}
}
EUVIMED