Experimental and Theoretical Study of Symmetrical Bis(imino)pyridines as Steel and Zinc Corrosion Inhibitors
Corrosion and Materials Degradation · 29.07.2026 · 7 (3) · 48
DOI: 10.3390/cmd7030048 ↗Kurz gefasst
Fachartikel in der Zeitschrift Corrosion and Materials Degradation, online erschienen am 29.07.2026. Verfasst von Milena Milošević und 7 weiteren Autor:innen. Die Arbeit nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development and Innovation of the Republic of Serbia.
Abstract (Originalsprache)
In this study, the inhibition efficiency (IE) of symmetrical bis(imino)pyridines (BIPs) used in corrosion protection for zinc and iron was investigated in 0.5 M NaCl (pH 3 and pH 7) and an acidic (1 M HCl) medium using linear polarization resistance (LPR) and electrochemical impedance spectroscopy (EIS). Three derivatives, BIP-9, BIP-14 and BIP-16, exhibited the most relevant inhibition performance and acted as mixed-type corrosion inhibitors. In a neutral medium, BIP-16 exhibited the highest IE calculated from EIS, reaching 74.8% on iron and 61.2% on zinc. In 1 M HCl, the highest IE inhibition efficiency was obtained for BIP-9 on iron (93.7%), while BIP-16 and BIP-14 reached 78.8% and 75.1%, respectively. The IE increased with concentration up to an optimum value, while time- and temperature-dependent studies indicated partial loss of protection for individual inhibitor systems and improved long-term protection for the Ce(III) acetate + BIP-16 system, particularly on iron. The highest IE was observed at 25 °C, likely due to inhibitor desorption at higher temperatures. Ce(III) acetate also showed the highest IE for iron in 0.5 M NaCl at pH 3. Adsorption of inhibitors followed the Langmuir model, and calculated parameters indicated spontaneous adsorption with dominant physisorption. DFT calculations supported a medium-dependent inhibition mechanism. Environmental hazard assessment identified BIP-16 as the least hazardous compound with promising eco-friendly potential.
Förderung
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia
Zitieren
APA
Milošević, M., Pejić, J., Marunkić, D., Cvijetić, I., Simović, A., Đuričković, I., Simić, K., & Marinković, A. (2026). Experimental and Theoretical Study of Symmetrical Bis(imino)pyridines as Steel and Zinc Corrosion Inhibitors. Corrosion and Materials Degradation, 7(3), 48. https://doi.org/10.3390/cmd7030048
Vancouver
Milošević M, Pejić J, Marunkić D, Cvijetić I, Simović A, Đuričković I, et al. Experimental and Theoretical Study of Symmetrical Bis(imino)pyridines as Steel and Zinc Corrosion Inhibitors. Corrosion and Materials Degradation. 2026;7(3):48. doi:10.3390/cmd7030048
BibTeX
@article{Miloevi2026,
author = {Milošević, Milena and Pejić, Jovanka and Marunkić, Dunja and Cvijetić, Ilija and Simović, Anđela and Đuričković, Ivan and Simić, Katarina and Marinković, Aleksandar},
title = {Experimental and Theoretical Study of Symmetrical Bis(imino)pyridines as Steel and Zinc Corrosion Inhibitors},
journal = {Corrosion and Materials Degradation},
year = {2026},
volume = {7},
number = {3},
pages = {48},
doi = {10.3390/cmd7030048}
}
EUVIMED