Event-Based Evaluation of Short-Term Wettability Degradation of RTV Nanocomposite-Coated 150 kV Ceramic Insulators Under Tropical Flashover Stress
Corrosion and Materials Degradation · 30.03.2026 · 7 (2) · 22
DOI: 10.3390/cmd7020022 ↗Kurz gefasst
Fachartikel in der Zeitschrift Corrosion and Materials Degradation, online erschienen am 30.03.2026. Verfasst von Yusreni Warmi und 8 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research and Innovation Agency https://ror.org/02hmjzt55.
Abstract (Originalsprache)
Flashover events can induce rapid surface condition changes on outdoor ceramic insulators, while early-stage degradation is typically assessed indirectly through long-term ageing or electrical diagnostics. This study proposes an event-based, surface-focused evaluation framework to assess short-term flashover-induced surface degradation using normalized wettability indicators. A controlled experimental comparison was conducted on uncoated, TiO2-RTV-coated, and SiO2-RTV-coated 150 kV ceramic insulators subjected to a single flashover pre-stress under humid tropical conditions. Static contact angles decreased from 42.6° to 18.3° for uncoated ceramic, from 112.4° to 86.7° for TiO2-RTV, and from 115.8° to 92.6° for SiO2-RTV after flashover exposure. The corresponding relative wettability retention values were 43.0%, 77.1%, and 80.0%, while the wettability degradation index values were 0.57, 0.23, and 0.20, respectively. Surface morphology and elemental presence were qualitatively examined via SEM–EDS. The results show that both nanocomposite coatings effectively preserve post-flashover surface hydrophobicity compared with uncoated ceramics, with the SiO2-RTV system exhibiting the highest short-term wettability retention. By integrating static contact-angle measurements, qualitative surface morphology, and normalized wettability indicators, this study proposes an event-based evaluation framework for RTV-coated ceramic insulators. Flashover-voltage and leakage-current measurements were included only as supplementary validation to support the surface-based interpretation, without implying direct electrical performance modeling. This surface-focused, event-based approach provides an experimental basis for post-flashover condition assessment of ceramic insulators operating in humid outdoor environments.
Förderung
- National Research and Innovation Agency https://ror.org/02hmjzt55
Zitieren
APA
Warmi, Y., Handra, N., Wismogroho, A. S., Syukri, S., Amalia, S., Putra, A. M. N., Habdillah, H., Martini, M., & Nabil, M. N. (2026). Event-Based Evaluation of Short-Term Wettability Degradation of RTV Nanocomposite-Coated 150 kV Ceramic Insulators Under Tropical Flashover Stress. Corrosion and Materials Degradation, 7(2), 22. https://doi.org/10.3390/cmd7020022
Vancouver
Warmi Y, Handra N, Wismogroho AS, Syukri S, Amalia S, Putra AMN, et al. Event-Based Evaluation of Short-Term Wettability Degradation of RTV Nanocomposite-Coated 150 kV Ceramic Insulators Under Tropical Flashover Stress. Corrosion and Materials Degradation. 2026;7(2):22. doi:10.3390/cmd7020022
BibTeX
@article{Warmi2026,
author = {Warmi, Yusreni and Handra, Nofriady and Wismogroho, Agus Sukarto and Syukri, Syukri and Amalia, Sitti and Putra, Andi M. Nur and Habdillah, Hamdi and Martini, Martini and Nabil, Muhammad Naufalun},
title = {Event-Based Evaluation of Short-Term Wettability Degradation of RTV Nanocomposite-Coated 150 kV Ceramic Insulators Under Tropical Flashover Stress},
journal = {Corrosion and Materials Degradation},
year = {2026},
volume = {7},
number = {2},
pages = {22},
doi = {10.3390/cmd7020022}
}
EUVIMED