EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CFD Simulation of a Vertical-Axis Savonius-Type Micro Wind Turbine Using Meteorological Data from an Educational Environment

José Cabrera-Escobar, Carlos Mauricio Carrillo Rosero, César Hernán Arroba Arroba, Santiago Paúl Cabrera Anda, Catherine Cabrera-Escobar, Raúl Cabrera-Escobar

Clean Technologies · 12.03.2026 · 8 (2) · 40

DOI: 10.3390/cleantechnol8020040 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clean Technologies, online erschienen am 12.03.2026. Verfasst von José Cabrera-Escobar und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a two-dimensional computational fluid dynamics analysis of a vertical-axis Savonius-type wind turbine under atmospheric conditions representative of an educational environment located in the Ecuadorian Andean region. Unlike previous studies conducted under sea-level meteorological conditions, this research is performed under high-altitude conditions (2723 m a.s.l.). The unsteady flow around the rotor was simulated using a two-dimensional approach based on the Unsteady Reynolds-Averaged Navier–Stokes (URANS) equations, discretized with the finite volume method and coupled with the k–ω Shear Stress Transport (SST) turbulence model. The rotor rotation was modeled using sliding mesh technique, employing a second-order implicit time scheme to ensure numerical stability and adequate temporal resolution. The numerical model was configured for a tip speed ratio of 0.8 and a wind speed of 3.9 m/s. The time step was defined based on a constant angular advancement of the rotor per time iteration, ensuring numerical stability and adequate temporal resolution. The aerodynamic torque was obtained by integrating the pressure and viscous forces acting on the blades, allowing the calculation of the mechanical power generated and the power coefficient. The results showed a periodic and stable torque behavior after the initial transient cycles, yielding an average torque of 0.7687 N·m and a mechanical power of 5.17 W, while the power coefficient reached a value of 0.2102. Analysis of the flow fields revealed the formation of a low-velocity wake downstream of the rotor, regions of high turbulent kinetic energy associated with periodic vortex shedding, and a significant pressure difference between the advancing and returning blades, confirming that turbine operation is dominated by drag forces. The numerical results were validated through comparison with previous studies, showing good agreement and demonstrating the reliability of the proposed Computational Fluid Dynamics (CFD) approach. This study highlights the potential of Savonius turbines for low-power applications in urban and educational environments, as well as the usefulness of CFD as a tool for evaluating and optimizing their aerodynamic performance.

Zitieren

APA

Cabrera-Escobar, J., Rosero, C. M. C., Arroba, C. H. A., Anda, S. P. C., Cabrera-Escobar, C., & Cabrera-Escobar, R. (2026). CFD Simulation of a Vertical-Axis Savonius-Type Micro Wind Turbine Using Meteorological Data from an Educational Environment. Clean Technologies, 8(2), 40. https://doi.org/10.3390/cleantechnol8020040

Vancouver

Cabrera-Escobar J, Rosero CMC, Arroba CHA, Anda SPC, Cabrera-Escobar C, Cabrera-Escobar R. CFD Simulation of a Vertical-Axis Savonius-Type Micro Wind Turbine Using Meteorological Data from an Educational Environment. Clean Technologies. 2026;8(2):40. doi:10.3390/cleantechnol8020040

BibTeX
@article{CabreraEscobar2026,
  author = {Cabrera-Escobar, José and Rosero, Carlos Mauricio Carrillo and Arroba, César Hernán Arroba and Anda, Santiago Paúl Cabrera and Cabrera-Escobar, Catherine and Cabrera-Escobar, Raúl},
  title = {CFD Simulation of a Vertical-Axis Savonius-Type Micro Wind Turbine Using Meteorological Data from an Educational Environment},
  journal = {Clean Technologies},
  year = {2026},
  volume = {8},
  number = {2},
  pages = {40},
  doi = {10.3390/cleantechnol8020040}
}
Kostenlos starten →