EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Borax-, KOH-, and NaOH-Treated Coal on Reducing Carbon Waste and Activated Carbon Production in Synthetic Rutile Production from Ilmenite

William Spencer, Don Ibana, Pritam Singh, Aleksandar N. Nikoloski

Clean Technologies · 20.10.2025 · 7 (4) · 92

DOI: 10.3390/cleantechnol7040092 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clean Technologies, online erschienen am 20.10.2025. Verfasst von William Spencer und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Coal is commonly used as both fuel and reducing agent in producing synthetic rutile from ilmenite (FeTiO3) via the Becher process, which upgrades ilmenite to high-purity TiO2 (>88%). However, coal-based reduction generates significant carbon waste. This study investigated the effect of adding 1–5% w/w potassium hydroxide (KOH), sodium hydroxide (NaOH), and sodium tetraborate (borax) to coal during ilmenite reduction to improve metallisation and reduce carbon burn-off. Results showed that 1% w/w additives significantly increased metallisation to 96% (KOH), 95% (NaOH), and 93% (borax), compared to 80% without additives, while higher concentrations (3–5% w/w) decreased metallisation. Scanning electron microscopy (SEM)analysis showed cleaner particle surfaces and optimal metallisation at 1% w/w, whereas higher additive levels caused agglomeration or sintering due to elevated silica and alumina activity. Additive type also influenced TiO2 quality, with KOH enhancing TiO2 at low concentrations but causing negative effects at higher levels, while NaOH and borax reduced TiO2 quality via sodium-based compound formation. All additives reduced carbon burn-off, with KOH producing the greatest reduction. The iodine number of the carbon residue increased with higher additive concentrations, with KOH achieving 710 mg/g at 1% w/w and 900 mg/g at 5% w/w, making the residue suitable for water treatment. Overall, KOH is the most effective additive for producing high-quality synthetic rutile while minimising carbon waste.

Zitieren

APA

Spencer, W., Ibana, D., Singh, P., & Nikoloski, A. N. (2025). Effect of Borax-, KOH-, and NaOH-Treated Coal on Reducing Carbon Waste and Activated Carbon Production in Synthetic Rutile Production from Ilmenite. Clean Technologies, 7(4), 92. https://doi.org/10.3390/cleantechnol7040092

Vancouver

Spencer W, Ibana D, Singh P, Nikoloski AN. Effect of Borax-, KOH-, and NaOH-Treated Coal on Reducing Carbon Waste and Activated Carbon Production in Synthetic Rutile Production from Ilmenite. Clean Technologies. 2025;7(4):92. doi:10.3390/cleantechnol7040092

BibTeX
@article{Spencer2025,
  author = {Spencer, William and Ibana, Don and Singh, Pritam and Nikoloski, Aleksandar N.},
  title = {Effect of Borax-, KOH-, and NaOH-Treated Coal on Reducing Carbon Waste and Activated Carbon Production in Synthetic Rutile Production from Ilmenite},
  journal = {Clean Technologies},
  year = {2025},
  volume = {7},
  number = {4},
  pages = {92},
  doi = {10.3390/cleantechnol7040092}
}
Kostenlos starten →