EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation of Dithiocarbamate and Carboxyl Co-Modified Chitosan and Its Adsorption of Heavy Metal Copper from Copper–Ammonia Wastewater

Chaoyang He, Tingting Jiang, Langbo Yi, Wenyong Hu

Chemistry · 30.01.2026 · 8 (2) · 16

DOI: 10.3390/chemistry8020016 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chemistry, online erschienen am 30.01.2026. Verfasst von Chaoyang He und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the challenge of removing copper from copper–ammonia complex wastewater in the printed circuit board (PCB) industry, this study employed natural chitosan (CTS) as the base material. Dithiocarbamate (DTC) groups were grafted onto CTS, followed by further carboxylation (-COOH) to produce two novel adsorbents: DTC-CTS and DTC-CTS-COOH. The materials were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), SEM, and related techniques. The effects of solution pH, adsorption isotherms, kinetics, and regeneration performance were systematically investigated. Characterization results confirmed the successful introduction of DTC and carboxyl (-COOH) groups. Adsorption experiments demonstrated that DTC-CTS-COOH exhibited superior Cu2+ adsorption performance across pH 5–8, achieving a removal efficiency of (97.67 ± 1.3)% at pH 7. Its adsorption behavior followed the Langmuir model, with a maximum adsorption capacity (Qm) of 234.8 mg·g−1 at 318.15 K, significantly higher than that of DTC-CTS (183.6 mg·g−1). Adsorption kinetics conformed to a pseudo-second-order model, indicating rapid adsorption rates. After five adsorption-desorption cycles, DTC-CTS-COOH maintained a Cu2+ removal rate above 68.41%. The synergistic interaction between -COOH and DTC functional groups enhanced the adsorbent’s capacity, rate, and pH adaptability, demonstrating that DTC-CTS-COOH holds strong potential for application in the treatment of complex copper–ammonia wastewater.

Zitieren

APA

He, C., Jiang, T., Yi, L., & Hu, W. (2026). Preparation of Dithiocarbamate and Carboxyl Co-Modified Chitosan and Its Adsorption of Heavy Metal Copper from Copper–Ammonia Wastewater. Chemistry, 8(2), 16. https://doi.org/10.3390/chemistry8020016

Vancouver

He C, Jiang T, Yi L, Hu W. Preparation of Dithiocarbamate and Carboxyl Co-Modified Chitosan and Its Adsorption of Heavy Metal Copper from Copper–Ammonia Wastewater. Chemistry. 2026;8(2):16. doi:10.3390/chemistry8020016

BibTeX
@article{He2026,
  author = {He, Chaoyang and Jiang, Tingting and Yi, Langbo and Hu, Wenyong},
  title = {Preparation of Dithiocarbamate and Carboxyl Co-Modified Chitosan and Its Adsorption of Heavy Metal Copper from Copper–Ammonia Wastewater},
  journal = {Chemistry},
  year = {2026},
  volume = {8},
  number = {2},
  pages = {16},
  doi = {10.3390/chemistry8020016}
}
Kostenlos starten →