EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research of the Process of Obtaining Monocalcium Phosphate from Unconditional Phosphate Raw Materials

Abibulla Anarbayev, Balzhan Kabylbekova, Zhakhongir Khussanov, Bakyt Smailov, Nurlan Anarbaev, Yevgeniy Kulikov

ChemEngineering · 02.04.2025 · 9 (2) · 39

DOI: 10.3390/chemengineering9020039 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemEngineering, online erschienen am 02.04.2025. Verfasst von Abibulla Anarbayev und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article presents methods for processing low-grade phosphate raw materials from the Chilisay deposit using a circulation method to produce mineral fertilizers and feed monocalcium phosphate. A study was conducted on the process of obtaining high-quality monocalcium phosphate, and optimal parameters for the decomposition of low-grade phosphate raw materials were determined. Based on the research, it was established that for the decomposition of phosphate raw materials, phosphoric acid with a concentration of 36–42% P2O5 should be used; the recycle phosphoric acid rate should be 540–560% of the stoichiometric amount required for the formation of monocalcium phosphate (MCP); the decomposition temperature should be 95–100 °C; the decomposition duration should be 40–50 min; the filtration temperature of the insoluble residue should be 85–90 °C; the crystallization temperature of MCP should be 40–45 °C; and the crystallization duration should be 85–90 min. For the sulfation of the mother solution and the production of recycle phosphoric acid, sulfuric acid with a concentration of 86–93% H2SO4 should be used; the sulfuric acid rate should be 95–100% of the stoichiometric amount required for the decomposition of dissolved Ca(H2PO4)2. After drying the wet residue, monocalcium phosphate was obtained with the following composition: P2O5—55%, Ca—18.01%, H2O—4.0%, F—0.01%, As—0.004%, Pb—0.002%. The obtained monocalcium phosphate is used in agriculture as a mineral fertilizer and feed monocalcium phosphate.

Förderung

  • Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan

Zitieren

APA

Anarbayev, A., Kabylbekova, B., Khussanov, Z., Smailov, B., Anarbaev, N., & Kulikov, Y. (2025). Research of the Process of Obtaining Monocalcium Phosphate from Unconditional Phosphate Raw Materials. ChemEngineering, 9(2), 39. https://doi.org/10.3390/chemengineering9020039

Vancouver

Anarbayev A, Kabylbekova B, Khussanov Z, Smailov B, Anarbaev N, Kulikov Y. Research of the Process of Obtaining Monocalcium Phosphate from Unconditional Phosphate Raw Materials. ChemEngineering. 2025;9(2):39. doi:10.3390/chemengineering9020039

BibTeX
@article{Anarbayev2025,
  author = {Anarbayev, Abibulla and Kabylbekova, Balzhan and Khussanov, Zhakhongir and Smailov, Bakyt and Anarbaev, Nurlan and Kulikov, Yevgeniy},
  title = {Research of the Process of Obtaining Monocalcium Phosphate from Unconditional Phosphate Raw Materials},
  journal = {ChemEngineering},
  year = {2025},
  volume = {9},
  number = {2},
  pages = {39},
  doi = {10.3390/chemengineering9020039}
}
Kostenlos starten →