EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advanced Sustainable Process Integration and Comprehensive Techno-Economic Evaluation of Polystyrene Waste Upcycling into Methanol as a Clean Alternative Fuel

Usama Ahmed

ChemEngineering · 14.08.2026 · 10 (8) · 101

DOI: 10.3390/chemengineering10080101 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemEngineering, online erschienen am 14.08.2026. Verfasst von Usama Ahmed. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Interdisciplinary Research Center for Hydrogen Technologies and Carbon Management (IRC-HTCM) at KFUPM.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents an integrated and sustainable approach for the valorization of polystyrene (PS) plastic waste into methanol, contributing to circular carbon utilization and waste-to-fuel strategies. Two simulation models were developed in Aspen plus. In Case 1, PS is converted to syngas through steam gasification, followed by its conversion into methanol. In Case 2, a steam methane reforming (SMR) unit is integrated with the gasification unit, using the heat from the gasifier-derived syngas to boost hydrogen production and overall methanol yield. This integration boosts the hydrogen-to-carbon ratio, doubling methanol production in Case 2 compared to Case 1. In terms of energy performance, Case 2 exhibits a process efficiency of 81% and exergy efficiency of 73%, both significantly higher than 48% and 60%, compared to Case 1. From an economic standpoint, Case 2 requires greater capital investment and annual operational expenditure, yet it proves to be more cost-effective in the long run compared to Case 1 due to the higher methanol production. The methanol production cost is reduced by 50%, from $1.001/kg in Case 1 to $0.505/kg in Case 2. These improvements are driven by increased throughput and process integration that supports sustainable and circular carbon management.

Förderung

  • Interdisciplinary Research Center for Hydrogen Technologies and Carbon Management (IRC-HTCM) at KFUPM

Zitieren

APA

Ahmed, U. (2026). Advanced Sustainable Process Integration and Comprehensive Techno-Economic Evaluation of Polystyrene Waste Upcycling into Methanol as a Clean Alternative Fuel. ChemEngineering, 10(8), 101. https://doi.org/10.3390/chemengineering10080101

Vancouver

Ahmed U. Advanced Sustainable Process Integration and Comprehensive Techno-Economic Evaluation of Polystyrene Waste Upcycling into Methanol as a Clean Alternative Fuel. ChemEngineering. 2026;10(8):101. doi:10.3390/chemengineering10080101

BibTeX
@article{Ahmed2026,
  author = {Ahmed, Usama},
  title = {Advanced Sustainable Process Integration and Comprehensive Techno-Economic Evaluation of Polystyrene Waste Upcycling into Methanol as a Clean Alternative Fuel},
  journal = {ChemEngineering},
  year = {2026},
  volume = {10},
  number = {8},
  pages = {101},
  doi = {10.3390/chemengineering10080101}
}
Kostenlos starten →