EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sequential Anaerobic–Aerobic Treatment of Paint Wastewater: Performance and LC–MS Pollutant Transformation

E. S. Manju, Basavaraju Manu

ChemEngineering · 05.03.2026 · 10 (3) · 38

DOI: 10.3390/chemengineering10030038 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemEngineering, online erschienen am 05.03.2026. Verfasst von E. S. Manju und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Paint manufacturing wastewater contains complex mixtures of solvents, resins, surfactants, pigments, and polymeric additives that result in high chemical oxygen demand (COD), toxicity, and poor biodegradability. Conventional physicochemical treatment provides limited removal of dissolved organics, and the pollutant-level behavior of paint effluents during biological treatment remains insufficiently characterized. This study addresses this gap by evaluating a sequential anaerobic–aerobic batch process treating three distinct synthetic paint wastewater samples. This study is a comparative investigation of sequential biological treatment across multiple paint wastewater variants, combined with high-resolution LC–MS to track compound-level transformations. Treatment performance was assessed through COD removal, biogas generation, pH and redox behavior, and LC–MS profiling of organic contaminants. The anaerobic stage achieved 70–95% COD removal depending on wastewater type. Aerobic polishing increased overall removal efficiencies, while PWW3 exhibited reduced stability during extended operation. LC–MS analysis showed substantial decreases in the number and intensity of chromatographic peaks and demonstrated degradation of phthalates, glycol ethers, organophosphate plasticizers, and solvent-derived compounds. The study provides integrated performance- and pollutant-level assessment of sequential anaerobic–aerobic treatment of paint wastewater and demonstrates the influences of wastewater heterogeneity in biological degradation pathways.

Zitieren

APA

Manju, E. S., & Manu, B. (2026). Sequential Anaerobic–Aerobic Treatment of Paint Wastewater: Performance and LC–MS Pollutant Transformation. ChemEngineering, 10(3), 38. https://doi.org/10.3390/chemengineering10030038

Vancouver

Manju ES, Manu B. Sequential Anaerobic–Aerobic Treatment of Paint Wastewater: Performance and LC–MS Pollutant Transformation. ChemEngineering. 2026;10(3):38. doi:10.3390/chemengineering10030038

BibTeX
@article{Manju2026,
  author = {Manju, E. S. and Manu, Basavaraju},
  title = {Sequential Anaerobic–Aerobic Treatment of Paint Wastewater: Performance and LC–MS Pollutant Transformation},
  journal = {ChemEngineering},
  year = {2026},
  volume = {10},
  number = {3},
  pages = {38},
  doi = {10.3390/chemengineering10030038}
}
Kostenlos starten →