EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Phase Evolution, Densification, and Mechanical Performance of a Multiphase Clay-Based Ceramic from the Almaty Region, Kazakhstan

Zhanar Zhumadilova, Yelzhan Orynbekov, Maratbek Zhuginissov, Ruslan Nurlybayev, Aigerim Tolegenova, Adlet Zhagifarov, Nurbek Tengebayev, Assel Taubayeva

Ceramics · 29.10.2026 · 9 (11) · 119

DOI: 10.3390/ceramics9110119 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ceramics, online erschienen am 29.10.2026. Verfasst von Zhanar Zhumadilova und 7 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Republic of Kazakhstan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a comparative evaluation of natural clays from the Koksay (K-Cl), Shemolgan (S-Cl), and Uzynagash (U-Cl) deposits in the Almaty region of Kazakhstan, followed by a detailed investigation of the firing behavior of K-Cl. The raw materials were characterized in terms of physical and technological properties, particle-size distribution, and chemical composition. The three clays exhibited similar oxide compositions dominated by SiO2 (62.81–63.41 wt.%), Al2O3 (13.57–13.77 wt.%), and relatively high CaO contents (10.38–10.94 wt.%). K-Cl was selected for firing at 1050, 1100, and 1150 °C based on the combined raw-material screening results. Limited densification occurred at 1050 and 1100 °C. Firing at 1150 °C increased the fired density to 2221 kg/m3, linear shrinkage to 10.10%, and compressive strength to 54.21 MPa, while water absorption decreased to 3.9%. XRD analysis revealed substantial reorganization of the crystalline assemblage, including an increase in the relative contribution of hedenbergite from 28% to 50% between 1100 and 1150 °C. SEM–EDS observations showed the development of a more consolidated microstructure at the higher firing temperature. Overall, the results indicate the potential of K-Cl as a local raw material for dense fired construction ceramics and identify 1100–1150 °C as a promising range for further optimization of the firing conditions.

Förderung

  • Ministry of Science and Higher Education of the Republic of Kazakhstan

Zitieren

APA

Zhumadilova, Z., Orynbekov, Y., Zhuginissov, M., Nurlybayev, R., Tolegenova, A., Zhagifarov, A., Tengebayev, N., & Taubayeva, A. (2026). Phase Evolution, Densification, and Mechanical Performance of a Multiphase Clay-Based Ceramic from the Almaty Region, Kazakhstan. Ceramics, 9(11), 119. https://doi.org/10.3390/ceramics9110119

Vancouver

Zhumadilova Z, Orynbekov Y, Zhuginissov M, Nurlybayev R, Tolegenova A, Zhagifarov A, et al. Phase Evolution, Densification, and Mechanical Performance of a Multiphase Clay-Based Ceramic from the Almaty Region, Kazakhstan. Ceramics. 2026;9(11):119. doi:10.3390/ceramics9110119

BibTeX
@article{Zhumadilova2026,
  author = {Zhumadilova, Zhanar and Orynbekov, Yelzhan and Zhuginissov, Maratbek and Nurlybayev, Ruslan and Tolegenova, Aigerim and Zhagifarov, Adlet and Tengebayev, Nurbek and Taubayeva, Assel},
  title = {Phase Evolution, Densification, and Mechanical Performance of a Multiphase Clay-Based Ceramic from the Almaty Region, Kazakhstan},
  journal = {Ceramics},
  year = {2026},
  volume = {9},
  number = {11},
  pages = {119},
  doi = {10.3390/ceramics9110119}
}
Kostenlos starten →