EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

ZnO, ZnO:Ce3+ and ZnO:Nd3+ Microflowers on Stainless-Steel Mesh Prepared by Means of Spray Pyrolysis Technique for Photocatalytic and Photoluminescent Applications

Natali López García, Adriana Báez Rodríguez, Luis Zamora-Peredo, Óscar Velázquez-Camilo, Rafael Martínez-Martínez, Ciro Falcony-Guajardo, Omar Solorza-Feria, Manuel García-Hipólito, Pablo Cardoso-Ávila, Jaime Martínez-Castillo, Amado Carlos García-Velasco

Ceramics · 19.08.2026 · 9 (8) · 89

DOI: 10.3390/ceramics9080089 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ceramics, online erschienen am 19.08.2026. Verfasst von Natali López García und 10 weiteren Autor:innen. Die Arbeit nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A homogeneous photocatalyst on a stable substrate is required for photocatalytic reactors in wastewater treatment. ZnO films were synthesized on stainless steel prepared by the spray pyrolysis technique at different deposition temperatures (350 to 500 °C in steps of 50 °C). Scanning electron microscopy showed microflowers formed by nanopetals with an average size of 2 μm. The ZnO wurtzite structure and its defects were studied by Raman spectroscopy, X-ray diffraction, diffuse reflectance, and photoluminescence spectroscopy. A deposition temperature of 400 °C was chosen due to the presence of a higher number of vibrational modes, better distribution of microflowers, smaller crystallite size and a higher number of defects than the other options. Lanthanides were incorporated into ZnO by solution spraying, and then thermal treatment was performed at 600 °C. The photocatalytic evaluation of ZnO showed the best photocatalytic activity under UV light at 365 nm with a 69.34% degradation efficiency at 120 min. Photocatalytic activity toward methylene blue degradation was enhanced in ZnO:Ce3+ (2 and 4 atom%) and ZnO:Nd3+ (0.05 and 2 atom%) samples, achieving degradation efficiencies above 90% within 30 min of UV–visible light irradiation.

Zitieren

APA

García, N. L., Rodríguez, A. B., Zamora-Peredo, L., Velázquez-Camilo, Ó., Martínez-Martínez, R., Falcony-Guajardo, C., Solorza-Feria, O., García-Hipólito, M., Cardoso-Ávila, P., Martínez-Castillo, J., & García-Velasco, A. C. (2026). ZnO, ZnO:Ce3+ and ZnO:Nd3+ Microflowers on Stainless-Steel Mesh Prepared by Means of Spray Pyrolysis Technique for Photocatalytic and Photoluminescent Applications. Ceramics, 9(8), 89. https://doi.org/10.3390/ceramics9080089

Vancouver

García NL, Rodríguez AB, Zamora-Peredo L, Velázquez-Camilo Ó, Martínez-Martínez R, Falcony-Guajardo C, et al. ZnO, ZnO:Ce3+ and ZnO:Nd3+ Microflowers on Stainless-Steel Mesh Prepared by Means of Spray Pyrolysis Technique for Photocatalytic and Photoluminescent Applications. Ceramics. 2026;9(8):89. doi:10.3390/ceramics9080089

BibTeX
@article{Garca2026,
  author = {García, Natali López and Rodríguez, Adriana Báez and Zamora-Peredo, Luis and Velázquez-Camilo, Óscar and Martínez-Martínez, Rafael and Falcony-Guajardo, Ciro and Solorza-Feria, Omar and García-Hipólito, Manuel and Cardoso-Ávila, Pablo and Martínez-Castillo, Jaime and García-Velasco, Amado Carlos},
  title = {ZnO, ZnO:Ce3+ and ZnO:Nd3+ Microflowers on Stainless-Steel Mesh Prepared by Means of Spray Pyrolysis Technique for Photocatalytic and Photoluminescent Applications},
  journal = {Ceramics},
  year = {2026},
  volume = {9},
  number = {8},
  pages = {89},
  doi = {10.3390/ceramics9080089}
}
Kostenlos starten →