EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sustainable Use of Gypsum Waste for Applications in Soil–Cement Bricks: Mechanical, Environmental, and Durability Performance

Elvia Soraya Santos Nascimento, Herbet Alves de Oliveira, Cochiran Pereira dos Santos, Maria de Andrade Gomes, Mário Ernesto Giroldo Valerio, Zélia Soares Macedo

Ceramics · 01.07.2025 · 8 (3) · 83

DOI: 10.3390/ceramics8030083 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ceramics, online erschienen am 01.07.2025. Verfasst von Elvia Soraya Santos Nascimento und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 85 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CNPq.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the use of gypsum waste from civil construction as a partial substitute for cement in soil–cement formulations, aiming to produce eco-friendly bricks aligned with circular economy principles. Formulations were prepared using a 1:8 cement–soil ratio, with gypsum replacing cement in proportions ranging from 5% to 40%. The raw materials were characterized in terms of chemical composition, crystalline phases, plasticity, and thermal behavior. Specimens, molded by uniaxial pressing into cylindrical bodies and cured for either 7 or 28 days, were evaluated for compressive strength, water absorption, durability, and microstructure. Water absorption remained below 20% in all samples, with an average value of 16.20%. Compressive strength after 7 days exhibited a slight reduction with increasing gypsum content, ranging from 16.36 MPa (standard formulation) to 13.74 MPa (40% gypsum), all meeting the quality standards. After 28 days of curing, the formulation containing 10% gypsum achieved the highest compressive strength (26.7 MPa), surpassing the reference sample (25.2 MPa). Mass loss during wetting–drying cycles remained within acceptable limits for formulations incorporating up to 20% gypsum. Notably, samples with 5% and 10% gypsum demonstrated superior mechanical performance, while the 20% formulation showed performance comparable to the standard formulation. These findings indicate that replacing up to 20% of cement with gypsum waste is a technically and environmentally viable approach, supporting sustainable development, circular economy, and reduction of construction-related environmental impacts.

Förderung

  • CNPq

Zitieren

APA

Nascimento, E. S. S., Oliveira, H. A. D., Santos, C. P. D., Gomes, M. D. A., Valerio, M. E. G., & Macedo, Z. S. (2025). Sustainable Use of Gypsum Waste for Applications in Soil–Cement Bricks: Mechanical, Environmental, and Durability Performance. Ceramics, 8(3), 83. https://doi.org/10.3390/ceramics8030083

Vancouver

Nascimento ESS, Oliveira HAD, Santos CPD, Gomes MDA, Valerio MEG, Macedo ZS. Sustainable Use of Gypsum Waste for Applications in Soil–Cement Bricks: Mechanical, Environmental, and Durability Performance. Ceramics. 2025;8(3):83. doi:10.3390/ceramics8030083

BibTeX
@article{Nascimento2025,
  author = {Nascimento, Elvia Soraya Santos and Oliveira, Herbet Alves de and Santos, Cochiran Pereira dos and Gomes, Maria de Andrade and Valerio, Mário Ernesto Giroldo and Macedo, Zélia Soares},
  title = {Sustainable Use of Gypsum Waste for Applications in Soil–Cement Bricks: Mechanical, Environmental, and Durability Performance},
  journal = {Ceramics},
  year = {2025},
  volume = {8},
  number = {3},
  pages = {83},
  doi = {10.3390/ceramics8030083}
}
Kostenlos starten →