EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hot Corrosion Behavior of Plasma-Sprayed Gd2Zr2O7/YSZ Functionally Graded Thermal Barrier Coatings

Rajasekaramoorthy Manogaran, Karthikeyan Alagu, Anderson Arul, Anandh Jesuraj, Dinesh Kumar Devarajan, Govindhasamy Murugadoss, Kamalan Kirubaharan Amirtharaj Mosas

Ceramics · 29.04.2024 · 7 (2) · 579-595

DOI: 10.3390/ceramics7020038 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ceramics, online erschienen am 29.04.2024. Verfasst von Rajasekaramoorthy Manogaran und 6 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Indian space research organization (ISRO).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of advanced thermal barrier coating (TBC) materials with better hot corrosion resistance, phase stability, and residual stresses is an emerging research area in the aerospace industry. In the present study, four kinds of TBCs, namely, single-layer yttria-stabilized zirconia (YSZ), single-layer gadolinium zirconate (GZ), bilayer gadolinium zirconate/yttria-stabilized zirconia (YSZ/GZ), and a multilayer functionally graded coating (FGC) of YSZ and GZ, were deposited on NiCrAlY bond-coated nickel-based superalloy (Inconel 718) substrates using the atmospheric plasma spray technique. The hot corrosion behavior of the coatings was tested by applying a mixture of Na2SO4 and V2O5 onto the surface of TBC, followed by isothermal heat treatment at 1273 K for 50 h. The characterization of the corroded samples was performed by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) to identify physical and chemical changes in the coatings. GIXRD was used to analyze the residual stresses of the coatings. Residual stress in the FGC coating was found to be −15.2 ± 10.6 MPa. The wear resistance of TBCs is studied using a linear reciprocating tribometer, and the results indicate that gadolinium zirconate-based TBCs showed better performance when deposited in bilayer and multilayered functionally graded TBC systems. The wear rate of as-coated FGC coatings was determined to be 2.90 × 10−4 mm3/Nm, which is lower than the conventional YSZ coating.

Förderung

  • Indian space research organization (ISRO)

Zitieren

APA

Manogaran, R., Alagu, K., Arul, A., Jesuraj, A., Devarajan, D. K., Murugadoss, G., & Mosas, K. K. A. (2024). Hot Corrosion Behavior of Plasma-Sprayed Gd2Zr2O7/YSZ Functionally Graded Thermal Barrier Coatings. Ceramics, 7(2), 579-595. https://doi.org/10.3390/ceramics7020038

Vancouver

Manogaran R, Alagu K, Arul A, Jesuraj A, Devarajan DK, Murugadoss G, et al. Hot Corrosion Behavior of Plasma-Sprayed Gd2Zr2O7/YSZ Functionally Graded Thermal Barrier Coatings. Ceramics. 2024;7(2):579-595. doi:10.3390/ceramics7020038

BibTeX
@article{Manogaran2024,
  author = {Manogaran, Rajasekaramoorthy and Alagu, Karthikeyan and Arul, Anderson and Jesuraj, Anandh and Devarajan, Dinesh Kumar and Murugadoss, Govindhasamy and Mosas, Kamalan Kirubaharan Amirtharaj},
  title = {Hot Corrosion Behavior of Plasma-Sprayed Gd2Zr2O7/YSZ Functionally Graded Thermal Barrier Coatings},
  journal = {Ceramics},
  year = {2024},
  volume = {7},
  number = {2},
  pages = {579--595},
  doi = {10.3390/ceramics7020038}
}
Kostenlos starten →