An Anode-Supported Solid Oxide Fuel Cell (SOFC) Half-Cell Fabricated by Hybrid 3D Inkjet Printing and Laser Treatment
Ceramics · 30.06.2023 · 6 (3) · 1384-1396
DOI: 10.3390/ceramics6030085 ↗Kurz gefasst
Fachartikel in der Zeitschrift Ceramics, online erschienen am 30.06.2023. Verfasst von Inna Malbakhova und 6 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Russian Scientific Foundation.
Abstract (Originalsprache)
A NiO-10YSZ/10YSZ half-cell for anode-supported solid oxide fuel cells (SOFCs) was fabricated using 3D inkjet printing and layer-by-layer laser treatment of printing compositions followed by thermal sintering by a co-firing method. The optimal granulometric composition and rheological characteristics of the printing compositions to fabricate the NiO-10YSZ (60:40 wt.%) anode support, NiO-10YSZ (40:60 wt.%) anode functional layer (AFL), and 10YSZ electrolyte were determined. Effects of the pore former and laser post-treatment on the morphology of the as-prepared anodes for the manufacture of SOFC anode supports were studied, and the optimum laser exposure for hybrid 3D printing was determined. A mechanism of influence of the exposure of laser post-treatment on the morphology of the NiO-10YSZ anode supports has been proposed. The mass content of 10YSZ and the number of layers were shown to affect the surface microstructure and the thickness of the thin-film electrolytes deposited on the surface of the anode supports. The hybrid inkjet 3D printing offers great opportunities as it allows a one-pot procedure to fabricate a NiO-10YSZ/10YSZ SOFC half-cell for SOFC anode supports.
Förderung
- Russian Scientific Foundation
Zitieren
APA
Malbakhova, I., Bagishev, A., Vorobyev, A., Borisenko, T., Logutenko, O., Lapushkina, E., & Titkov, A. (2023). An Anode-Supported Solid Oxide Fuel Cell (SOFC) Half-Cell Fabricated by Hybrid 3D Inkjet Printing and Laser Treatment. Ceramics, 6(3), 1384-1396. https://doi.org/10.3390/ceramics6030085
Vancouver
Malbakhova I, Bagishev A, Vorobyev A, Borisenko T, Logutenko O, Lapushkina E, et al. An Anode-Supported Solid Oxide Fuel Cell (SOFC) Half-Cell Fabricated by Hybrid 3D Inkjet Printing and Laser Treatment. Ceramics. 2023;6(3):1384-1396. doi:10.3390/ceramics6030085
BibTeX
@article{Malbakhova2023,
author = {Malbakhova, Inna and Bagishev, Artem and Vorobyev, Alexander and Borisenko, Tatiana and Logutenko, Olga and Lapushkina, Elizaveta and Titkov, Alexander},
title = {An Anode-Supported Solid Oxide Fuel Cell (SOFC) Half-Cell Fabricated by Hybrid 3D Inkjet Printing and Laser Treatment},
journal = {Ceramics},
year = {2023},
volume = {6},
number = {3},
pages = {1384--1396},
doi = {10.3390/ceramics6030085}
}
EUVIMED