Multifunctional EDTA-Stabilized Ni-Oleate/ZnO Hybrid Nano-Additive for Simultaneous Desulfurization, Octane Enhancement, and Vapor Pressure Control in Refinery Gasoline: Characterization and DFT Mechanistic Insights
Catalysts · 18.11.2026 · 16 (11) · 1028
DOI: 10.3390/catal16111028 ↗Kurz gefasst
Fachartikel in der Zeitschrift Catalysts, online erschienen am 18.11.2026. Verfasst von Ibrahim A. Kareem Al-Dulaimi und 10 weiteren Autor:innen. Die Arbeit nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A novel EDTA@Ni-oleate/ZnO hybrid liquid additive was synthesized using a three-step coordination chemistry process and evaluated for gasoline upgrading under ambient blending conditions without externally supplied hydrogen. The additive was characterized using ATR-FTIR, UV-Vis spectroscopy, dynamic light scattering (DLS), field-emission scanning electron microscopy (FESEM), and X-ray diffraction (XRD). At the same time, gas chromatography–mass spectrometry (GC-MS) and density functional theory (DFT) calculations were employed to investigate changes in fuel composition and possible sulfur–material interactions. Spectroscopic and structural analyses provided evidence consistent with the formation of a hybrid coordination system containing Ni-oleate and ZnO-related components. DLS measurements of the freshly prepared dispersion in xylene showed an effective hydrodynamic diameter of 30.5 nm and a polydispersity index of 0.005. A laboratory-prepared formulation containing 350 mL of refinery gasoline, 40 mL of toluene, and 8 mL of the hybrid additive exhibited a decrease in measured sulfur concentration from 149.6 to 124.0 ppm, an increase in research octane number (RON) from 77.0 to 83.5, and a decrease in Reid vapor pressure (RVP) from 7.9 to 7.6 psi. A gasoline–toluene reference blend exhibited a RON of 80.4, demonstrating the substantial contribution of toluene to the overall octane enhancement. The observed sulfur concentration decrease includes blending dilution effects, and the contribution of chemical adsorption could not be independently quantified. GC-MS analysis indicated changes in relative hydrocarbon peak-area distributions but did not establish selective hydrocarbon removal. DFT calculations provided molecular-level insights into possible interactions between dibenzothiophene and the investigated Ni-EDTA and ZnO models, although the proposed adsorption mechanism remains experimentally unconfirmed. These findings demonstrate changes in sulfur concentration, RON, and RVP for the investigated laboratory formulation and identify opportunities for further evaluation of its fuel-upgrading performance and practical applicability.
Zitieren
APA
Al-Dulaimi, I. A. K., Sultan, A. J., Mahmoud, L. H., Al-Jadir, T., Kadhim, B. J., Oun, Z. A. A., Fadhil, D. A., Aljaafari, H. A. S., Sabri, L. S., Al-Humairi, S. T., & Al-Dahhan, M. H. (2026). Multifunctional EDTA-Stabilized Ni-Oleate/ZnO Hybrid Nano-Additive for Simultaneous Desulfurization, Octane Enhancement, and Vapor Pressure Control in Refinery Gasoline: Characterization and DFT Mechanistic Insights. Catalysts, 16(11), 1028. https://doi.org/10.3390/catal16111028
Vancouver
Al-Dulaimi IAK, Sultan AJ, Mahmoud LH, Al-Jadir T, Kadhim BJ, Oun ZAA, et al. Multifunctional EDTA-Stabilized Ni-Oleate/ZnO Hybrid Nano-Additive for Simultaneous Desulfurization, Octane Enhancement, and Vapor Pressure Control in Refinery Gasoline: Characterization and DFT Mechanistic Insights. Catalysts. 2026;16(11):1028. doi:10.3390/catal16111028
BibTeX
@article{AlDulaimi2026,
author = {Al-Dulaimi, Ibrahim A. Kareem and Sultan, Abbas J. and Mahmoud, Luma H. and Al-Jadir, Thaer and Kadhim, Bashar J. and Oun, Zainab A. Abd and Fadhil, Dalal Abbas and Aljaafari, Haydar A. S. and Sabri, Laith S. and Al-Humairi, Shurooq Talib and Al-Dahhan, Muthanna H.},
title = {Multifunctional EDTA-Stabilized Ni-Oleate/ZnO Hybrid Nano-Additive for Simultaneous Desulfurization, Octane Enhancement, and Vapor Pressure Control in Refinery Gasoline: Characterization and DFT Mechanistic Insights},
journal = {Catalysts},
year = {2026},
volume = {16},
number = {11},
pages = {1028},
doi = {10.3390/catal16111028}
}
EUVIMED