EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multiphysics Modeling of Coupled Multiphase Transport and Electrocatalysis in Industrial Zero-Gap Alkaline Water Electrolyzers: Cell Size and Flow Field Effects

Bin Huang, Lei Bao, Qi Chen, Jiwen Peng, Zhuo Li, Huanhuan Li, Qiang Ma, Qian Xu

Catalysts · 11.11.2026 · 16 (11) · 1001

DOI: 10.3390/catal16111001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Catalysts, online erschienen am 11.11.2026. Verfasst von Bin Huang und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Large-scale alkaline water electrolysis (AWE) is essential for green hydrogen production, yet coupled multiphysics transport in industrial-scale cells remains insufficiently understood. A multiphysics model is developed for zero-gap AWE cells with different diameters. The anisotropic permeabilities of support meshes are determined via pore-scale simulations and incorporated into a REV-scale model coupling two-phase flow, species transport, electrochemistry, and heat transfer. The model is validated against a 5 MW commercial system with a mean relative error below 3%. The anode support mesh exhibits non-negligible permeability anisotropy. Under identical current density and flow coefficient, larger-diameter cells show higher electrochemical efficiency due to enhanced bubble removal. Increasing flow rate reduces gas blockage and improves two-phase uniformity, but with diminishing returns for large cells. For single-inlet/single-outlet configurations, varying flow rate alone cannot improve concentration and temperature uniformity. The multi-inlet design reduces top gas accumulation when the primary-to-secondary flow ratio is controlled; excessive secondary flow deteriorates uniformity. The multi-outlet design moderately improves gas removal but significantly enhances concentration and temperature uniformity, reducing dissolved hydrogen accumulation and improving safety. These flow-field optimizations are expected to help mitigate bubble-induced active-site loss and reduce local overpotential, thereby benefiting HER/OER catalyst performance. These findings support scale-up design and flow-field optimization of industrial AWE cells.

Zitieren

APA

Huang, B., Bao, L., Chen, Q., Peng, J., Li, Z., Li, H., Ma, Q., & Xu, Q. (2026). Multiphysics Modeling of Coupled Multiphase Transport and Electrocatalysis in Industrial Zero-Gap Alkaline Water Electrolyzers: Cell Size and Flow Field Effects. Catalysts, 16(11), 1001. https://doi.org/10.3390/catal16111001

Vancouver

Huang B, Bao L, Chen Q, Peng J, Li Z, Li H, et al. Multiphysics Modeling of Coupled Multiphase Transport and Electrocatalysis in Industrial Zero-Gap Alkaline Water Electrolyzers: Cell Size and Flow Field Effects. Catalysts. 2026;16(11):1001. doi:10.3390/catal16111001

BibTeX
@article{Huang2026,
  author = {Huang, Bin and Bao, Lei and Chen, Qi and Peng, Jiwen and Li, Zhuo and Li, Huanhuan and Ma, Qiang and Xu, Qian},
  title = {Multiphysics Modeling of Coupled Multiphase Transport and Electrocatalysis in Industrial Zero-Gap Alkaline Water Electrolyzers: Cell Size and Flow Field Effects},
  journal = {Catalysts},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1001},
  doi = {10.3390/catal16111001}
}
Kostenlos starten →