EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Kinetic Modeling and Optimization of a Low-Carbon Tri-Generation System Based on Calcium-Looping, Sorption-Enhanced Steam Methane Reforming

Jiale Li, Linbo Yan, Liang Wang, Shishu Qi, Yuhan Duan, Zhenning Feng, Zhiquan Ren, Siyu Chen, Ziyue Jia

Catalysts · 29.07.2026 · 16 (8) · 691

DOI: 10.3390/catal16080691 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Catalysts, online erschienen am 29.07.2026. Verfasst von Jiale Li und 8 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Nuclear Industry Engineering Research and Design Co., Ltd.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Combined cooling, heating, and power (CCHP) tri-generation systems can greatly improve comprehensive energy utilization efficiency thanks to their energy-cascade utilization concept. However, traditional fossil-fuel-based CCHP systems still suffer from intensive carbon emissions, hindering their further development in the current low-carbon scenario. To solve this issue, a new low-carbon CCHP system (LC-CCHP) integrating a calcium-looping, sorption-enhanced steam methane reforming (CL-SE-SMR) unit, a lithium bromide absorption chiller, and a hydrogen gas turbine is proposed in this work, and the corresponding system model is built to evaluate its performance. The proposed system features an innovative architecture that integrates carbon capture directly into the reforming process, which simultaneously enables a high hydrogen yield and low carbon-capture penalty. Moreover, instead of the widely used thermodynamic equilibrium assumption, a detailed kinetic model is employed for the CL-SE-SMR unit, which provides more realistic predictions and greater reference value for practical engineering applications. Then, multi-objective optimization is conducted using a particle swarm optimization algorithm to identify the optimal operating conditions. It is found that the proposed system performs best at a steam-to-carbon molar ratio of 4.37, a calcium-to-carbon mass ratio of 6.23, an air-equivalency molar ratio of 1.39 for a hydrogen gas turbine and a reaction temperature of 600 °C for SE-SMR. Under these operating conditions, the system can achieve a carbon-capture rate of 89.2%, an exergy efficiency of 45.7%, an energy efficiency of 95.4%, and a levelized cost of exergy of 0.109 $/kWh.

Förderung

  • Nuclear Industry Engineering Research and Design Co., Ltd

Zitieren

APA

Li, J., Yan, L., Wang, L., Qi, S., Duan, Y., Feng, Z., Ren, Z., Chen, S., & Jia, Z. (2026). Kinetic Modeling and Optimization of a Low-Carbon Tri-Generation System Based on Calcium-Looping, Sorption-Enhanced Steam Methane Reforming. Catalysts, 16(8), 691. https://doi.org/10.3390/catal16080691

Vancouver

Li J, Yan L, Wang L, Qi S, Duan Y, Feng Z, et al. Kinetic Modeling and Optimization of a Low-Carbon Tri-Generation System Based on Calcium-Looping, Sorption-Enhanced Steam Methane Reforming. Catalysts. 2026;16(8):691. doi:10.3390/catal16080691

BibTeX
@article{Li2026,
  author = {Li, Jiale and Yan, Linbo and Wang, Liang and Qi, Shishu and Duan, Yuhan and Feng, Zhenning and Ren, Zhiquan and Chen, Siyu and Jia, Ziyue},
  title = {Kinetic Modeling and Optimization of a Low-Carbon Tri-Generation System Based on Calcium-Looping, Sorption-Enhanced Steam Methane Reforming},
  journal = {Catalysts},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {691},
  doi = {10.3390/catal16080691}
}
Kostenlos starten →