EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Performance Bifunctional HER/OER Electrocatalysis Enabled by Solvothermal Cobalt Growth on Screen-Printed Nickel Microparticle Interlayers

Ioannis Poimenidis, Bochenek Kamil, Martsinchyk Aliaksandr, Majewska Karolina, Shuhayeu Pavel, Jarosław Milewski, Michalis Konsolakis

Catalysts · 23.07.2026 · 16 (8) · 665

DOI: 10.3390/catal16080665 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Catalysts, online erschienen am 23.07.2026. Verfasst von Ioannis Poimenidis und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Warsaw University of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For efficient alkaline water-splitting, it is crucial to have bifunctional electrocatalysts that exhibit low overpotentials, durability, and the possibility of being produced through scalable methods. This study involved the use of screen printing to apply a porous nickel microparticle/polymer interlayer onto commercial nickel foam, which then acted as a base for the solvothermal growth of cobalt-based oxide/hydroxide nanostructures. The optimized electrode showed excellent bifunctional capabilities in 1 M KOH, requiring only 61 mV for the hydrogen evolution reaction and 241 mV for the oxygen evolution reaction at a current density of 10 mA cm−2. In comparison, the control electrodes, such as those with cobalt directly deposited on unmodified nickel foam and screen-printed nickel foam substrates without cobalt, exhibited poorer overall performance. Although the cobalt-modified nickel foam exhibited a higher Cdl-derived apparent electrochemical surface area, the cobalt-modified screen-printed electrode achieved the best ECSA-normalized HER and OER responses, indicating that the enhancement in activity was not solely due to the capacitive surface area of the electrode. The increased integrated redox charge suggests a greater contribution from electrochemically accessible Co/Ni redox-active species, while impedance analysis supports a more favorable apparent interfacial response under the tested HER- and OER-relevant conditions. Long-term chronopotentiometry and post-stability SEM confirmed stable bifunctional operation.

Förderung

  • Warsaw University of Technology

Zitieren

APA

Poimenidis, I., Kamil, B., Aliaksandr, M., Karolina, M., Pavel, S., Milewski, J., & Konsolakis, M. (2026). High-Performance Bifunctional HER/OER Electrocatalysis Enabled by Solvothermal Cobalt Growth on Screen-Printed Nickel Microparticle Interlayers. Catalysts, 16(8), 665. https://doi.org/10.3390/catal16080665

Vancouver

Poimenidis I, Kamil B, Aliaksandr M, Karolina M, Pavel S, Milewski J, et al. High-Performance Bifunctional HER/OER Electrocatalysis Enabled by Solvothermal Cobalt Growth on Screen-Printed Nickel Microparticle Interlayers. Catalysts. 2026;16(8):665. doi:10.3390/catal16080665

BibTeX
@article{Poimenidis2026,
  author = {Poimenidis, Ioannis and Kamil, Bochenek and Aliaksandr, Martsinchyk and Karolina, Majewska and Pavel, Shuhayeu and Milewski, Jarosław and Konsolakis, Michalis},
  title = {High-Performance Bifunctional HER/OER Electrocatalysis Enabled by Solvothermal Cobalt Growth on Screen-Printed Nickel Microparticle Interlayers},
  journal = {Catalysts},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {665},
  doi = {10.3390/catal16080665}
}
Kostenlos starten →