Response Surface Optimization and Parametric Analysis of Hydrogen Production by Ethanol Steam Reforming over Iridium Promoted Mesoporous-Silica Supported Ni Catalyst
Catalysts · 09.06.2026 · 16 (6) · 532
DOI: 10.3390/catal16060532 ↗Kurz gefasst
Fachartikel in der Zeitschrift Catalysts, online erschienen am 09.06.2026. Verfasst von Ramesh Kanthasamy. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Institutional Fund Projects, Ministry of Education, King Abdulaziz University.
Abstract (Originalsprache)
The need for a transition to a low-carbon economy has led to the growing demand for hydrogen as a clean energy source. Hence, ethanol steam reforming (ESR) is one of the promising technological pathways for hydrogen production. Ethanol, which is the major feedstock, can be obtained from abundant biomass. However, one of the major drawbacks is catalyst deactivation due to the high temperature requirement to start the reaction. This study therefore focused on employing a response surface approach to optimize the operating conditions (reaction temperature, steam-to-ethanol ratio and catalyst amount) of ethanol steam reforming over an Iridium-promoted Ni/MCM-41 catalyst. The Iridium-promoted Ni/MCM-41 catalyst was synthesized using the sequential wet impregnation method and characterized using field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), N2 physisorption analysis, and X-ray diffraction (XRD). A central composite experiment design (CCD) was employed to study the effect of the variables on the hydrogen production from the ESR. The catalytic efficacy was ascertained by evaluating the H2 yield under varied experimental conditions provided by the CCD. The characterization of the catalyst revealed well-dispersed Ir and Ni nanoparticles on a mesoporous MCM-41 support. Catalytic evaluations indicate that the H2 yield was most influenced by the reaction temperature (correlation coefficient of 0.68), followed by the catalyst amount (correlation coefficient of 0.34) and steam-to-ethanol ratio (correlation coefficient of 0.28). A maximum H2 yield of 5.82 mol/mol ethanol was obtained at 798.11 °C, a steam-to-ethanol ratio of 3.40, and 1.25 g of catalyst. These findings underscore the importance of Ir-promoted Ni/MCM-41 catalyst for efficient H2 production, highlighting the reaction temperature as a critical parameter for process optimization.
Förderung
- Institutional Fund Projects
- Ministry of Education
- King Abdulaziz University
Zitieren
APA
Kanthasamy, R. (2026). Response Surface Optimization and Parametric Analysis of Hydrogen Production by Ethanol Steam Reforming over Iridium Promoted Mesoporous-Silica Supported Ni Catalyst. Catalysts, 16(6), 532. https://doi.org/10.3390/catal16060532
Vancouver
Kanthasamy R. Response Surface Optimization and Parametric Analysis of Hydrogen Production by Ethanol Steam Reforming over Iridium Promoted Mesoporous-Silica Supported Ni Catalyst. Catalysts. 2026;16(6):532. doi:10.3390/catal16060532
BibTeX
@article{Kanthasamy2026,
author = {Kanthasamy, Ramesh},
title = {Response Surface Optimization and Parametric Analysis of Hydrogen Production by Ethanol Steam Reforming over Iridium Promoted Mesoporous-Silica Supported Ni Catalyst},
journal = {Catalysts},
year = {2026},
volume = {16},
number = {6},
pages = {532},
doi = {10.3390/catal16060532}
}
EUVIMED