EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CuTiO3 Perovskite-Type as an Efficient Catalyst for Alkaline Lignin Depolymerization Towards Selective Vanillin Production

Ratheeshkumar Shanmugam, Arul Chan Basha, Vinod Kumar, Saravanan Ramiah Shanmugam, Malinee Sriariyanun, Ponnusami Venkatachalam

Catalysts · 01.06.2026 · 16 (6) · 510

DOI: 10.3390/catal16060510 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Catalysts, online erschienen am 01.06.2026. Verfasst von Ratheeshkumar Shanmugam und 5 weiteren Autor:innen. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Research and Innovation Fund, Thailand, Department of Science & Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lignin is one of the most abundant biopolymers in nature. The major challenge in lignin depolymerization lies in the formation of complex mixtures that require extensive downstream separation. Selective depolymerization strategies aim to overcome this limitation by promoting controlled bond cleavage while suppressing undesired secondary reactions. In this work, a series of rare-earth-free, perovskite-type mixed metal oxides with general compositions ZnxNi1–xTiO3 and CuyNi1–yTiO3 were synthesized and evaluated as heterogeneous catalysts for the base-catalyzed depolymerization of lignin. Among the investigated materials, CuTiO3 exhibited superior catalytic performance, enabling the formation of vanillin as the dominant monomer with high selectivity. The selected catalyst was further characterized using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Brunauer–Emmett–Teller (BET) surface area analysis. The combined effects of key reaction parameters, including temperature, pressure, lignin-to-catalyst ratio, NaOH concentration, and reaction time, were systematically investigated using response surface methodology (RSM). Under the optimized conditions (154 °C, 0.3 MPa, lignin-to-catalyst ratio of 24.5:1, 10 mL of 0.5 M NaOH, and 12 h reaction time), a monomer yield of 11.5 ± 0.46% with ~81% GC-selectivity toward vanillin was achieved. These findings demonstrate that perovskite-type titanates can serve as robust and reusable catalysts.

Förderung

  • National Science Research and Innovation Fund, Thailand
  • Department of Science & Technology

Zitieren

APA

Shanmugam, R., Basha, A. C., Kumar, V., Shanmugam, S. R., Sriariyanun, M., & Venkatachalam, P. (2026). CuTiO3 Perovskite-Type as an Efficient Catalyst for Alkaline Lignin Depolymerization Towards Selective Vanillin Production. Catalysts, 16(6), 510. https://doi.org/10.3390/catal16060510

Vancouver

Shanmugam R, Basha AC, Kumar V, Shanmugam SR, Sriariyanun M, Venkatachalam P. CuTiO3 Perovskite-Type as an Efficient Catalyst for Alkaline Lignin Depolymerization Towards Selective Vanillin Production. Catalysts. 2026;16(6):510. doi:10.3390/catal16060510

BibTeX
@article{Shanmugam2026,
  author = {Shanmugam, Ratheeshkumar and Basha, Arul Chan and Kumar, Vinod and Shanmugam, Saravanan Ramiah and Sriariyanun, Malinee and Venkatachalam, Ponnusami},
  title = {CuTiO3 Perovskite-Type as an Efficient Catalyst for Alkaline Lignin Depolymerization Towards Selective Vanillin Production},
  journal = {Catalysts},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {510},
  doi = {10.3390/catal16060510}
}
Kostenlos starten →