Development of Ni-P-N-C/Nickel Foam for Efficient Hydrogen Production via Urea Electro-Oxidation
Catalysts · 07.07.2025 · 15 (7) · 662
DOI: 10.3390/catal15070662 ↗Kurz gefasst
Fachartikel in der Zeitschrift Catalysts, online erschienen am 07.07.2025. Verfasst von Abdullah M. Aldawsari und 2 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Prince Sattam bin Abdulaziz University.
Abstract (Originalsprache)
Electrocatalytic urea oxidation reaction (UOR) is a promising dual-purpose approach for hydrogen production and wastewater treatment, addressing critical energy and environmental challenges. However, conventional anode materials often suffer from limited active sites and high charge transfer resistance, restricting UOR efficiency. To overcome these issues, a novel NiP@PNC/NF electrocatalyst was developed via a one-step thermal annealing process under nitrogen, integrating nickel phosphide (NiP) with phosphorus and nitrogen co-doped carbon nanotubes (PNCs) on a nickel foam (NF) substrate. This design enhances catalytic activity and charge transfer, achieving current densities of 50 mA cm−2 at 1.34 V and 100 mA cm−2 at 1.43 V versus the reversible hydrogen electrode (RHE). The electrode’s high electrochemical surface area (235 cm2) and double-layer capacitance (94.1 mF) reflect abundant active sites, far surpassing NiP/NF (48 cm2, 15.8 mF) and PNC/NF (39.5 cm2, 12.9 mF). It maintains exceptional stability, with only a 16.3% performance loss after 35 h, as confirmed by HR-TEM showing an intact nanostructure. Our single-step annealing technique provides simplicity, scalability, and efficient integration of NiP nanoparticles inside a PNC matrix on nickel foam. This method enables consistent distribution and robust substrate adhesion, which are difficult to attain with multi-step or more intricate techniques.
Förderung
- Prince Sattam bin Abdulaziz University
Zitieren
APA
Aldawsari, A. M., Shaddad, M. N., & Aladeemy, S. A. (2025). Development of Ni-P-N-C/Nickel Foam for Efficient Hydrogen Production via Urea Electro-Oxidation. Catalysts, 15(7), 662. https://doi.org/10.3390/catal15070662
Vancouver
Aldawsari AM, Shaddad MN, Aladeemy SA. Development of Ni-P-N-C/Nickel Foam for Efficient Hydrogen Production via Urea Electro-Oxidation. Catalysts. 2025;15(7):662. doi:10.3390/catal15070662
BibTeX
@article{Aldawsari2025,
author = {Aldawsari, Abdullah M. and Shaddad, Maged N. and Aladeemy, Saba A.},
title = {Development of Ni-P-N-C/Nickel Foam for Efficient Hydrogen Production via Urea Electro-Oxidation},
journal = {Catalysts},
year = {2025},
volume = {15},
number = {7},
pages = {662},
doi = {10.3390/catal15070662}
}
EUVIMED