EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Eco-Friendly Mechanochemical Fabrication of Polypyrrole/Ag-ZnO Heterostructures for Enhanced Photocatalytic Degradation of Methyl Orange

Muhammad Khalid Nazir, Muhammad Babar Taj, Azza A. Al-Ghamdi, Afaf Almasoudi, Fatimah Mohammad H. AlSulami, Hadeel M. Banbela, Omar Makram Ali, Muhammad Mahboob Ahmed, Muhammad Imran Khan, Abdallah Shanableh, Javier Fernandez-Garcia

Catalysts · 18.03.2025 · 15 (3) · 284

DOI: 10.3390/catal15030284 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Catalysts, online erschienen am 18.03.2025. Verfasst von Muhammad Khalid Nazir und 10 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Taif University, University College London & IQS-School of Engineering.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A Ppy/Ag-ZnO catalyst was successfully synthesized at room temperature using a novel, green methodology. It involves a mechanically assisted metathesis reaction. The Ppy/Ag-ZnO catalyst was analyzed via X-ray diffraction Technique (XRD), Thermogravimetric analysis (TGA), Differential scanning calorimetry (DSC), Fourier Transform Infrared (FTIR), Scanning Electron Microscopy (SEM), UV–visible spectroscopy, Brunauer–Emmett–Teller (BET), and zeta potential. Debye Scherrer’s calculation suggested a crystallite size of 2.30 nm for Ppy/Ag-ZnO nanocomposite. SEM confirmed the production of aggregated particles with an average size of 2.65 μm, endorsing the -ve zeta potential value (−6.78 mV) due to the presence of Van der Waals forces among the particles of Ppy/Ag-ZnO. DSC confirms that the strong interfacial interaction between Ag-ZnO and the polar segments of Ppy is responsible for the higher Tg (107 °C) and Tm (270 °C) in Ppy/Ag-ZnO. The surface area and average pore size of Ppy/Ag-ZnO catalyst were determined to be 47.08 cm3/g and 21.72 Å, respectively. Methyl orange (MO) was used as a probe in a photocatalytic reaction of fabricated material, which demonstrated exceptional efficiency, exhibiting a removal rate of 91.11% with a rate constant of 0.028 min−1. Photocatalytic degradation of MO was shown to follow pseudo-first-order kinetics.

Förderung

  • Taif University
  • University College London & IQS-School of Engineering

Zitieren

APA

Nazir, M. K., Taj, M. B., Al-Ghamdi, A. A., Almasoudi, A., AlSulami, F. M. H., Banbela, H. M., Ali, O. M., Ahmed, M. M., Khan, M. I., Shanableh, A., & Fernandez-Garcia, J. (2025). Eco-Friendly Mechanochemical Fabrication of Polypyrrole/Ag-ZnO Heterostructures for Enhanced Photocatalytic Degradation of Methyl Orange. Catalysts, 15(3), 284. https://doi.org/10.3390/catal15030284

Vancouver

Nazir MK, Taj MB, Al-Ghamdi AA, Almasoudi A, AlSulami FMH, Banbela HM, et al. Eco-Friendly Mechanochemical Fabrication of Polypyrrole/Ag-ZnO Heterostructures for Enhanced Photocatalytic Degradation of Methyl Orange. Catalysts. 2025;15(3):284. doi:10.3390/catal15030284

BibTeX
@article{Nazir2025,
  author = {Nazir, Muhammad Khalid and Taj, Muhammad Babar and Al-Ghamdi, Azza A. and Almasoudi, Afaf and AlSulami, Fatimah Mohammad H. and Banbela, Hadeel M. and Ali, Omar Makram and Ahmed, Muhammad Mahboob and Khan, Muhammad Imran and Shanableh, Abdallah and Fernandez-Garcia, Javier},
  title = {Eco-Friendly Mechanochemical Fabrication of Polypyrrole/Ag-ZnO Heterostructures for Enhanced Photocatalytic Degradation of Methyl Orange},
  journal = {Catalysts},
  year = {2025},
  volume = {15},
  number = {3},
  pages = {284},
  doi = {10.3390/catal15030284}
}
Kostenlos starten →